Question about 1994 Honda Accord

1 Answer

No start 40psi at fuel rail .all new injectors.good spark. checked firing order.new plugs. checked main relay and all fuses. will start with ether but not own it's own?

Posted by on

  • Joey Nelson
    Joey Nelson Feb 06, 2009

    also has trouble code 16.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 125 Answers

It could be many things my suggestion is if check engine light comes on retrieve the code from ecu either buy following instructions in troubleshooting section of repair manual ex:haynes or chiltons or purchasing OBDI scanner from local parts store then moving on from there
first your mechanical timing is it on the money? using timing light and repair manual to check
second faulty crankcase or cam shaft positioning sensor
timing belt needs replacement
bad grounding system
weak voltage system ex:battery
faulty ecu ignition circuit or ecu malfunction
faulty map sensor
faulty ignition spark are you getting it correctly? or enough of it ether is lighter and far more volatile then fuel
faulty evap system ex: purge valve or charcoal cannister, EGR system

Posted on Feb 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1987 ford ranger the engine turns over but it wont start


Spark at plugs? Fuel filter? Pressure on injector delivery line? Pressure relief valve? You may be able to measure fuel pressure at the pressure relief valve location. and return line. If you have spark, I'd say it's a fuel supply problem

Dec 21, 2014 | Ford Cars & Trucks

1 Answer

Truck wont start after changing the spark plug and wires


It's already not start before you changed or after changed ?
If before. the timing belt or might be broken , burn fuel pump's fuse, injector's fuse or main engine relay.
If after. It's possible miss some wire that still not connect.

Mai

Feb 26, 2013 | 1986 Ford Bronco

2 Answers

'94 vw 2.0 wont start.it has sparks and fuel to the fuel rail, however i think that the injectors are not getting the pulse signal in order for them to work. What can I do to fix this problem? Your...


The injectors are fired by the engine controller, check the ECM power supply and make sure the relay is good. Also make sure you have a good clean ground. I hope this helps.

Jul 05, 2011 | 1994 Volkswagen Golf

2 Answers

1999 Dodge Intrepid 2.7L Replaced starter,


Here is a pic of a schrader valve. They all look about the same.3.jpg
If there isn't much pressure, cycle the ignition without turning the engine over and try again. If it is still weak, you may need a new fuel filter. If it is strong, you may have dirty or clogged fuel injectors.

It may be spark, but I'm inclined to think it is fuel related.

Good luck, and keep us in the loop!
JT

Mar 15, 2010 | 1999 Dodge Intrepid

2 Answers

1997 Chevrolet 1500 no start


is the fuel spraying into the cylinders? pull a plug and see if they have fuel on them.....If not you have a problem at the injectors if there is pressure on the rails. If fuel is present you aren't firing strong enough to ignite the fuel. pull a plug and put the wire on it and touch it to a ground and check to see if it is a good blue spark or a weak white or yellow spark...If no spark check for dead plugs or distributor module,

Feb 03, 2010 | 1997 Chevrolet K1500

2 Answers

Crank no start: has no spark and only has injector pulse on cyl # 1. if you spray starting fluid directly into throttle body car starts and stays running and has spark and inj. pulse. once you turn the car...


Fuel pump, you have to have press in the rail to fire all injectors- she will run on ether but not good for her. Ck your pump and any related fuses,relays,wiring.

Jul 11, 2009 | 2002 Hyundai Accent

2 Answers

Won't start


Hello;
Spray starter fuid or brake fluid in the intake, If the car starts I would check each injector for pulse, then you can start looking at the pmc for problems,
How is the compression in each cyl ? I have did this myself, (washed out the cyl) put some motor oil in cyl. and replace plugs ,then try to start.
good luck I hope this helps.

Feb 06, 2009 | 1994 Honda Accord

2 Answers

Need Help


have you checked the fuel pump?

Jan 06, 2009 | 1992 Buick Century

1 Answer

No power to fuel pump, relay is good, engine cranks over but won't start.


You need to follow a detailed troubleshooting procedure in a repair manual.
Check for spark plug fire during cranking after it dies.
No spark = ignition problem= computer will not fire injectors, and possibly cut out pump also.
Good spark = pump wonky, or power to pump system.
Also, other quick tests... when the thing dies, and then you crank,
1) Thump the fuel pump in the tank, if you can. A bad fuel pump might start up again.
2) Shoot some ether carb cleaner in the TB. If it only fires off the ether, the ignition system is no longer suspect.

Oct 13, 2008 | 1992 Dodge Dakota

Not finding what you are looking for?
1994 Honda Accord Logo

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...