Question about 2004 Pontiac Vibe

1 Answer

Door lock dont work and remote lock does

Cant see to find the problem on my chevy pickup remote works good lock and unlocks but from the door it dosent work

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Look under the Hood and Locate the Fuse Relay Box. Should be on the Drivers side torwards the Firewall. There is a Relay in it for the Door Locks. Replace this Relay and see if they will not work. Also check the Fuses in BOTH Boxes inside and under Hood with a Flashlight and Make for Sure that no Fuses are Blown. Please Rate My Response! Thanks!

Posted on Feb 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 chevy venture and the remote conttrol and manual keys stop wprking i have try to reset still dont work


did you replace battery in remote fob, and do you keys have integrated circuits -- if so replace batteries.

Go through the sequence carefully.

Jul 20, 2014 | 2003 Chevrolet Venture Passanger

1 Answer

Power lock


check door locks fuses and relays.if all is good and you cant operate door lock buttons manually problem could be in the generic electronic module.if door locks dont work from the remote battery could be dead in remote transmitter.try to reset door locks control module first obtain all remote transmitter.sit inside vechicle with all doors closed.switch ignition from off to on 8 times in 10 seconds. doors should lock then unlock.when this procedure works then press any button on any of the remote transmitter doors should lock and unlock.if all fails let dealership fix..

Dec 27, 2012 | 1998 Ford Windstar

1 Answer

2002 chevy trailblazer interior lights won't shutoff and doors won't lock or unlock with remote, rear hatch won't lock.


sound like you might have a few problem interior light might be the door switch but the lock n unlock can be a fuse if they dont work in the truck or need to chance the battery in your remote

Nov 07, 2010 | 2002 Chevrolet TrailBlazer

1 Answer

Good afternoon....what would cause my 2008 Chevy


It could be the power lock motor. You could have a short or bad wiring harness. Might just be a fuse that connects to both. But since you said it's only the driver side. When the power lock motor is bad it can trigger your alarm because they're wired together.

Hope that helps. Good luck.

Apr 06, 2010 | 2008 Chevrolet Avalanche

1 Answer

New battery in remote, but doors will not unlock


Do the locks work when using the interior lock buttons? If so, then you probably have to have the car dealer reprogram you remotes

Oct 17, 2009 | 2006 Chevrolet Impala

2 Answers

Remote Door Lock/Unlock will not work.


At first look, I would have guessed that your battery in the door opener was dead, but that is not the case. I suggest driving to a nearby Chevy dealer and ask one of the salesman if he/she can help. They have always been helpful to me. If not try another one as they are in business to sell not only cars, but service also. They will be your best bet to fixing it. :D

Jun 07, 2009 | 1999 Chevrolet Silverado 1500

2 Answers

Door locks quit working


check battery in the remote

May 10, 2009 | 2006 Chevrolet Tahoe

1 Answer

I can't disable my anti theft device on my chevy malibu 2004 and my car will not start


This usually works.Lock the doors with the remote.Press lock twice sounding the alarm.Then press the unlock button twice.Your car should start now.If that doesnt work try this,Lock the car again with the remote once.Go over to the passenger side door and use the key to unlock the door then press in the door unlock all doors.Hopefully by now it worked.Now if none of these work your security probably malfunctioned and theres only two things that will work,One is disconnecting the battery for 5 mins then reconnecting.unlock doors.the start.If that doesnt work you'll have to take it to the dealer to get the security reset or replaced.The steps I have wrot you are the diagnostics to reset it.I hope these work for you and good luck.See ya had have a great day..

Mar 31, 2009 | 2004 Chevrolet Malibu

2 Answers

Alarm problem on 2004 chevy tahoe


you will have to write your vehicles vin number down wich is if you look throught the windshild on the drivers side you will see it its a little plate with numbers but right down the vin number and take you drivers license and Registration with you to the chevy dealer ship and request the remote for that vehicle. and they should be able to get you one. as far as i know the remote is the only way to get the alarm off. I hope this helps you

Mar 21, 2009 | 2004 Chevrolet Tahoe

Not finding what you are looking for?
2004 Pontiac Vibe Logo

371 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...