Question about 1992 Isuzu Trooper
The check engine light comes on. I have heard that the older Isuzu´s (pre 1996) have a different OBD system than the OBDII. The codes are read out from the check engine light flashes after you connect together the appropriate connectors that are under the dash. But I am not sure which connecters and which wires you connect together. Does anyone know how to do this. Also does anyone have a manual for a 1992 Trooper. The driveability section plus wiring diagrams is what I require.
I found a free download, workshop manual online. It is 3500+ page PDF that includes every diagram and all info that you could possibly need. I dont remember the exact website but if you google iszu trooper pdf free download etc. you should have no trouble locating it.
Posted on Jun 08, 2009
Cycle the key off and on three times... last time remaining on... count the flashes from the check engine light... it's easier to have someone write them down as you read them so you don't miss any.
Please take a moment to rate this solution thanks
Posted on Feb 06, 2009
Tips for a great answer:
Jun 30, 2015 | 2005 Isuzu Ascender
Feb 21, 2015 | Isuzu Cars & Trucks
Feb 09, 2015 | Isuzu Cars & Trucks
Apr 14, 2010 | 1995 Isuzu Rodeo
Feb 10, 2010 | 1998 Pontiac Grand Am
Feb 02, 2009 | 1992 Isuzu Trooper
Feb 02, 2009 | 1997 Isuzu Trooper
591 people viewed this question
Usually answered in minutes!