Question about 1999 Dodge Intrepid
Where is the fuel filter located on a 99 dodge intrepid?
1999 dodge intrepid has map,egr,ect,and tps low and sometimes
high voltage codes.Idles fine but when giving some throttle it dies
Posted on Mar 10, 2009
Sorry to say but the fuel filter is built into the fule pump on the Intrepid thuse makeing a 'simple' job something that takes all day and requires droping the gas tank.
Posted on Mar 22, 2009
Should be on framerail in front of tank, not sure whether directly in front or in front of rear wheel, a lot of chrysler products are just ahead of passenger rear wheel on frame rail.
Posted on Feb 06, 2009
What engine? 2.7 passenger side on the bottom next to oil pan. 3.2 and 3.5 Drivers side coming off the side of block, near the front under the exhaust manifold.
Posted on Mar 24, 2009
The "Vehicle Speed Sensor" signal is generated by the transmisson output speed sensor. That is the one located at the rear of the case. It is externally mounted. That supplies "vehicle speed" info to the other On-Board Computers. The input turbine speed sensor is located just behind the bell housing area of the case. I believe the trans controller is the only module that needs that info. The Crank Position Sensor give engine RPM info and it is located on the bell housing near the engine block. I hope this helps.
Posted on Apr 02, 2009
you will need to drop the gas tank if you want to access the filter,it's inside.
you should only have to replace this fuel filter if your fuel tank was contaminated with something other than gas,
Posted on Nov 23, 2009
Tips for a great answer:
Oct 03, 2014 | 2004 Dodge Intrepid
Aug 29, 2011 | Dodge Intrepid Cars & Trucks
May 21, 2010 | 1993 Dodge Intrepid
Jan 26, 2010 | 2002 Dodge Intrepid
Dec 20, 2009 | 2002 Dodge Intrepid
Nov 22, 2009 | 1999 Dodge Intrepid
Nov 11, 2009 | Dodge Intrepid Cars & Trucks
May 18, 2009 | 1993 Dodge Intrepid
Jan 04, 2009 | 1999 Dodge Intrepid
Sep 21, 2014 | 1999 Dodge Intrepid
678 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: