2003 ford taurus 3.0 serpentine belt diagram
There was a dual overhead cam so I'm guessing that's the engine you are talking about The other 3.0 liter engine wasn't an overhead cam engine. I went on to be on the safe side and provided belt diagrams for both engines because they were different. The first picture and description of which pulley is which is for the DOHC 3.0L engine which is what I'm guessing you have. The second set of pictures/descriptions is for the other 3.0L engine. Hope this helps....
SOURCE: 2003 Ford Taurus Serpentine Belt
There are 2 engines listed at AutoZone.com. One has power steering pump on top, other has it in front (near rdiator).
Fig. Serpentine accessory drive belt routing-3.0L (VIN U) engine
Fig. Serpentine accessory drive belt routing-3.0L (VIN S) engine
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
SOURCE: please show diagram for replacing serpentine belt
How do you bypass the serpentine belt from the a/c compressor the reg belt is 85in
Fig. Serpentine accessory drive belt routing-3.0L (VIN U) engine
Fig. Serpentine accessory drive belt routing-3.0L (VIN S) engine
Fig. Serpentine accessory drive belt routing-3.0L (VIN U) engine
Fig. Serpentine accessory drive belt routing-3.0L (VIN S) engine
Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN U) engines
Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN S) engine
Fig. Serpentine accessory drive belt routing-Ford 3.4L SHO engine
Fig. Water pump drive belt routing-Ford 3.4L SHO engine
3,438 views
Usually answered in minutes!
×