Question about 2002 Honda Accord

1 Answer

Egr valve code P0401

Hi shawnbhonda. i replaced the egr valve [new] light is back on,same code.any suggestion? thanks...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

Did you unhook the battery for ten minutes or so to reset the light ?

Robert

Posted on Feb 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

03 honda civic 1.7L p0401 EGR code.


In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit. Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open Clean out the EGR valve and/or tubing to remove deposits Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model) Replace the DPFE sensor (with a good quality / OEM one)

Read more at: https://www.obd-codes.com/p0401
Copyright OBD-Codes.com

Sep 19, 2016 | 2003 Honda Civic

1 Answer

Hi, I have a 98 Honda Accord Ex V6 that showed the P0420 code and I was told that the catalytic converter needs to be replaced. So I replaced it and the check engine light came on with the P0401 code. I...


The error code p0420 does not rise only due to faulty catalytic converter but may also rise due to one of following reason:

1. Faulty rear O2 sensor

2. Damaged O2 sensor wiring

3. Exhaust leak

The error code p0401 indicates faulty Engine Gas Recirculation (EGR) valve. The remedy to the problem is:

a. Replace EGR valve

b. Repair damaged wiring of EGR valve

c. Clean the EGR valve tubing

Jun 27, 2013 | Cars & Trucks

2 Answers

Egr fault code p0401


Hi there:

In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.

  • Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open
  • Clean out the EGR valve and/or tubing to remove deposits
  • Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)
  • Replace the DPFE sensor (with a good quality / OEM one)
  • Replace the EGR valve


Hope this helps.

Dec 06, 2012 | Cars & Trucks

2 Answers

'01 Honda Accord, EX-L, V6, Code P0401 comes up at Auto Zone Is this a DIY job? Fairly handy


code P0401 is an EGR code.
which is insufficient EGR (exhaust gas recirculation) flow.it is quite common for people to just replace the EGR valve.



You can try doing it your self.:----
To troubleshoot these issue and solve it yourself.I suggest you to go through few help links related to
OBD code P0401:-----
Click the link below:-----


1997 Chrysler Sebring: OBD Error Code P0401?

http://howtobyme.blogspot.in/2012/06/1997-chrysler-sebring-obd-error-code.html

----------

2004 Hummer H2: OBD Code P0141?

http://whoisbyme.blogspot.in/2012/06/2004-hummer-h2-obd-code-p0141.html

-----------

DTC Trouble Code P0401?

http://schematicsdiagram.blogspot.com/2012/01/dtc-trouble-code-p0401.html

-----------
These will help.
Thanks.

Nov 28, 2012 | Honda Accord Cars & Trucks

2 Answers

Check engine light code P0401 98 Ford expedition


OBD-II Trouble Code P0401 - Insufficient EGR Flow

EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms.

A code P0401 most likely means one or more of the following has happened:
The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced
There is a blockage in the EGR (tube), most likely carbon buildup
The EGR valve is faulty
The EGR valve may not be opening due to a lack of vaccuum

Check it and keep us updated. Hope this helps (remember to rating this free answer).

Oct 13, 2011 | 1998 Ford Expedition

2 Answers

Fault code p0401


This error means Exhaust Gas Recirculation Flow Insufficient Detected.

You can deatils on the following site http://www.permoveo.ltd.uk/tabid/122/OBD-Error-Code/P0401/Diagnostics/Hyundai/Default.aspx

but for convenience I have reproduced that information here:
.
Generic OBD Error Code Details for P0401 Exhaust Gas Recirculation Flow Insufficient Detected What does this mean? OBD Code P0401refers to
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. SymptomsPossible sumptoms of OBD code P0401
You may notice drivability problems such as pinging (a.k.a. pre-ignition knock) when the engine is under load or the vehicle is at higher speeds. There may also be other symptoms. CausesPossible causes of OBD code P0401
A code P0401 most likely means one or more of the following has happened: •The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced•There is a blockage in the EGR (tube), most likely carbon buildup •The EGR valve is faulty •The EGR valve may not be opening due to a lack of vaccuum Possible SolutionsIn fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit. •Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open •Clean out the EGR valve and/or tubing to remove deposits•Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model)•Replace the DPFE sensor (with a good quality / OEM one)•Replace the EGR valve Related CodesP0400 P0402 P0403

Jul 12, 2011 | Hyundai Tucson Cars & Trucks

2 Answers

1999 mercury sable engine code p1744,p0401. Failed e check. EGR looks new, replaced egr solenoid then cleared codes. what more can i do about the p0401 code and the p1744 code Thanks


for p0401:
In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.
Use a vacuum pump and pull the EGR valve open while monitoring engine RPM's & DPFE voltage. There should be a noticable difference in RPM's with the EGR open.
Clean out the EGR valve and/or tubing to remove deposits.
Check the voltage at the DPFE, compare to specified values (refer to a repair manual for your specific model).
Replace the DPFE sensor (with a good quality / OEM one).
Replace the EGR valve.

Jul 08, 2011 | 1999 Mercury Sable

3 Answers

1998 ford escort code P0401 I need to know what this code is for. Thank You.


This code is an EGR code for insufficient amount of egr. It could be that the egr tube is clogged or the egr itself is bad or there is not enough vacuum to open the egr properly. There is also a sensor called the DPFE(differential pressure feedback egr) is faulty.

Jun 25, 2010 | 1998 Ford Explorer

1 Answer

95 Blazer code P0401


Have a little read of this link, it may help you.

http://www.obd-codes.com/p0401

Jun 19, 2009 | 1995 Chevrolet Blazer

4 Answers

2000 Honda Accord EGR Valve Error P0401


Jason,
-after you change the part you have to reset/clear the code

-this can be done by either:
(1) using the OBD2 code reader that Autozone used OR since option 2 (below) is very quick
(2) disconnecting the battery for about 30 seconds (this will delete all codes/radio presets/etc) but it will also clear the 'check engine' code
-this is what I do AFTER i write down my radio station presets :)

-hopefully the new EGR valve resolves your issue after you CLEAR the code
...but that code just means a an insufficient amount of Exhaust Gas recirculation (pressure difference) used to keep the emissions in check
-if it comes back, then there are a few other fixes to try also

-let me know if you need further assistance
-please remember to rate me `fix-ya`if it works
thanks

Nov 03, 2008 | 2000 Honda Accord

Not finding what you are looking for?
2002 Honda Accord Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...