Question about 2007 Mazda 3

Open Question

Mazda 3 GT both side mirrors

Hi. I ordered wide angle blue tint mirror (both sides) for my Mazda 3 GT 2007.

These mirros can be installed (stick) on olds ones or I can remove the old ones and install only these new ones.

I would like to install only the new ones, so I search on how remove the old sides mirrors.

I found somes infos to remove the plastics inside, that will let me have access to some screw... but do I will be able to only remove the mirror, and not all the side cover ??

Also, on a GT, I got a small speakers in this plastic... If I remove this plastic, is it dangerous to disconnect this small speakers ?

In brief :

1) is it possible to remove only the mirror without the mirror cover ?

2) is the only way is to remove the plastic inside de door ?

thanks.

Posted by on

  • St?phane Poulin Feb 05, 2009

    I also forget to mention the mirror on GT are not heated, but electric (sorry, my english is not very good... I mean they can be moved from the inside, usings a small "joystick"...) thanks

×

5 Suggested Answers

latoss101
  • 47 Answers

SOURCE: passenger side mirror, power, 2003 mazda Protege needs replaced

you need to remove plastic panel inside the door then you will find wireing plug undo and three bolts
to undo mirror ok m8

Posted on Jan 03, 2009

  • 1986 Answers

SOURCE: Need to get door panel off to replace side view mirro on passenger side.

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. then pop off the cover beside the mirror and remove the bolts

Posted on Aug 14, 2009

  • 1986 Answers

SOURCE: driver side mirror 2004 Pontiac Grand Am

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

  • 1986 Answers

SOURCE: passengers side rear view mirro replacement

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Posted on Sep 29, 2009

  • 1 Answer

SOURCE: My GMC sierra side mirror is loose on from the

I just spent about 2 hours trying to resolve the same problem, and discovered that there doesn't appear to be any way to repair the mirror without purchasing a whole new one. There a 3 screws you can access by slanting the mirror to the extemes in both the up or down positions. Once they are removed I discovered a 4th screw (once I broke the plastic pieces surrounding the mirror appart) that there is a 4th screw that is impossible to reach without removing the actual mirror part. In any case I discovered that the reason that the mirror was floppy is because there was a funny looking nut that is supposed to lock in the spring mechanism that was completely stipped and non functional. Better luck than me!

Posted on Jan 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove and replace passenger side mirror on a 2014 ford fusion


Replace Your Car Passenger Side Mirror - How To - DIY ...

? 3:46
https://www.youtube.com/watch?v=77lBQ_CRqdo
Apr 10, 2012 - Uploaded by GregHint
See how even a novice can repair a passenger mirror on a FordEscape. ... Replace Your Car Passenger Side Mirror - How To - DIY .... Replace 2003-2008 Toyota Corolla Side Mirror, How to Change Install 2004 2005 2006
About 22,000 results (0.61 seconds) Search ResultsHow-To: Replace Ford Fusion side mirror (HD) - YouTube? 7:27https://www.youtube.com/watch?v=iGHeXUbvvJsMay 7, 2014 - Uploaded by Derrick HardingFord Fusion SEL 3.0 Liter V6 How to fix broken side mirrorIncludes: ... Published on May 7, 2014 ..... Great instructions - just replaced the driver's side mirror on my 2007 Fusion following your instructions. ... Front brake pad replacement 2006 - 2012 Ford Fusion Lincoln Mazda Pads Rotor Install Remove ...

Jan 08, 2016 | Ford Cars & Trucks

1 Answer

2007 Chrysler Sebring, knocked the drivers side mirror off backing out of my garage. Is it easy to install or need to take to the dealership?


This is not hard to replace at all, most of the time the door panel doesnt have to be removed , just the small cover behind the mirror inside the door, the only problem is you must paint the mirror to match the car if its painted, i replace and paint mirrors all the time, buy one online and you will pay about 30.00 for it, heres a picture of it and you will not need to remove the door panel just the small cover that covers the mirroe nuts, the wire plugs in to back of the mirror, this is easy to do,make sure when looking for mirror you get what you have like if its heated or power. heres a picyure of your mirror good luck, and good day.johnjohn2_88.jpg

Mar 31, 2011 | 2007 Chrysler Sebring Sedan

1 Answer

I recently purchased some towing mirrors for my 2007 gmc sierra 1500, how do i change my stock mirrors to these? do you have installation instructions?


Hi, the door panels need to be removed,there are 3 mounting nuts, and a wiring harness,(if mirrors are power).unhook the wire, take the 3 nuts off, and remove the old mirror.Repeat for the other side,and the mirrors should be functional.Good luck...

Sep 22, 2010 | 2007 GMC Sierra 1500

1 Answer

How do you replace the glass in the driver side mirro?


Try Pep Boys or Autozone for a replacement mirror glass. They come in many different sizes cut to fit many different mirrors. Get one that is the same size as your old one, peal off the back sticky tape, and stick it onto the broken mirror glass if it's still there. No need to replace the entire mirror.

May 17, 2010 | 2005 Chevrolet TrailBlazer

1 Answer

Rear view mirror


Has the mirror previously been capable of providing a view of the left lane?
If it did not, the "clicking" sound is simply an indicator informing the user that the angle limit has been reached, the mirror will not travel any further.
Simply purchase a pair of stick on Convex mirrors, they are about 1.5" in diameter,they do the job perfectly. I know this because I've got them on my Protege5 mirrors.

Sep 22, 2009 | 2002 Mazda Protege

1 Answer

Replacing drivers side rear view mirro in Mitsubishi Galant 1997


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Apr 04, 2009 | 2007 Mitsubishi Galant SE Sedan

1 Answer

Replacing a cracked side-view mirror


well the best way is to take the inside mirro cap off there are 3 bolts that need to be taken out 10mm if its not accessible from there you need to loosenthe trim panel and take it off look around for hidden pop ups take the pop ups out and take the screws out then from there pull the bottom of the door trim out and slide arms around the edges and pull out there then pull up and outThanks for using fix ya. Please rate my response thank you very much

Jan 31, 2009 | 2005 Nissan Murano

1 Answer

How do you change an electric wing mirror on a mazda 323, i've managed to get one cheap and am looking to fit it myself to save money?


wll you need to take cover off mirro if you cant get to the 3 bolts from there then you need to drop the trim panel look for screws or little plasctic windows for screw one in the handle usually a few after you get them out pull from the bottom of the door then the sides and the lift from the bottom of trim and pull up know you should be able to change mirror

Jan 26, 2009 | 2004 Dodge Grand Caravan

2 Answers

Driver side mirro is hot


it is a heated mirror. usually comes on with defroster setting

Dec 31, 2008 | 2001 Lexus IS 300

1 Answer

2007 Hyundai Accent Hatchback cracked side mirror glass


hi from uk answer is yes the mirror glass can be bought on its own at least here in the uk HALFORDS do a selection of these for various models also a mirror glass that simply sticks to the cracked glass full surface by a backing of double sided glued cushion pad so assume your location will have these at motor supermart ? if not then you can do as i have done in past ? make a card template of mirror then cut or have cut ? your own mirror then double sided tape will do the same job?

Dec 11, 2008 | 2007 Hyundai Accent GS Hatchback

Not finding what you are looking for?
2007 Mazda 3 Logo

Related Topics:

521 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...