An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: turn on switch fuel pump"
There is not a Switch for the Fuel Pump. Look under the Hood and Locate the Fuse Relay Box. Inside this Box is a Relay for the Fuel Pump. The Diagram should be inside the Box Cover or Inside the Owners Manual. Replace this Relay and it should Start unless the Fuel Pump needs to be Replaced. Please Rate My Response! Thanks!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Daphine, if equipped with a fuel reset, look between the shock tower and brake fluid reservoir. Small box with rubber gasket/button on top mounted to shock tower. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
1994 to 2006 Sonata, a 2001 to 2006 Elantra, a 2000 to 2006 XG350 or a
2001 to 2006 Santa Fe, you will need to access alarm system control
module. On most of those vehicles it is located on the driver's side
fascia panel. But on the Sonata, the facia panel is in the center.
Once you have found this module,
you will want to ensure that the memory switch is in the OFF position.
Then turn the ignition on.
Wait 5 seconds and set the
memory switch to SET position and then press the remote transmitter lock
button to send the code to the alarm system control module.
If you would like to program a second remote transmitter then you will need to press second remote transmitter lock button.
Next set the memory switch to
off, then turn the ignition off. You can confirm your programming by
locking and unlocking the vehicle with both of the remotes. good luck my friend