What year is my Jeep

6b10b is 6- 1966 b- Feb 10 b- day shift . That tag is when that part was built. Your serial number should begin with a C and have 6 numbers after that. Can you tell me if it is a 3 cylinder diesel or a 4 cylinder gas engine.

first we need to know what type of plug it is, if it is a platinum plug you wont have to gap it. but usually it is 0.040 to 0.045 look at the tag under the hood it should be there.

good question, if stock car, 1984 jeep what?
just 1 post so no me cheating to find name of jeep.
year and told engine size, but no jeep model. what car is this?

this is covered all jeep forums.
and in the FSM.
if in the USA, open hood, look up under see that EPA sticker
and the spark timing, (can be diffr, for Calif cars. thus the sticker)
timing varies on export models too.

2.4L 4 cylinder, you mean 2.5L?
CJ5 jeep?
what?

its not the Diesel 2.4D, you asked for spark.

145 cu in (2.4 L) Isuzu C240 I4 diesel

post year, 1983 correct
what car.
what country.( if usa post state) or read the hood tag.?
what engine, 2.4 is wrong, size.

hi try to check wiring harnness under dash. or contact this number 09276429291 / (032) 5127262

There is a fuse box under the hood on the passenger side remove the cover and the #10 fuse is for the headlamps. Look on under side of cover for fuse #s.

some of the core and block parts on the motor will have some form of serial number on them to distinguish models and years of the cars they were made for any form of serial identification can help determine your year.

According to some old production records (from derek Redmond), your serial number corresponds to december 1963

Te build plate may be located under the hood on the firewall, inside the glove box, on the fender under the hood, or some other location. It may have been removed if you see a spot where it was riveted on with 2 holes.

Look on the drivers door pillar (door jamb) there should be a sticker there with that information

Please rate this solution thanks

It should be located within the serial number. Any dealer or body shop should be able to assist you with this.