- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Compare your rear knuckles to a non 4WS. You have to remove the steering extension shaft leading back there as well as the rear tie rods. The rear knuckles have to be locked so they don't steer. Might need to swap some of the components from a junkyard 88 89 90 91 Prelude.
need to check the back side of the ac connector where the harness plugs in remove the heater control unit assy and u will see the ac button connector with it still pluged in start the car and turn the ac button on wiggle the ac connector if the light comes on and off it's a loose connection in the harness/connector at the ac button try to jamb a folded over zip tie about 4inches long in between the ac button connector and the plastic frame basicly just make sure that the connector staitionary not wiggling around I had the same problem on my 95 prelude vtec push the ac button sometimes comes on or hitting the dash just got old hope this helps