Question about 2008 Jeep Grand Cherokee

1 Answer

Interior dome lights wont turn on

I was trying to install LED lights in my dome lights and I was able to install the front two lights fine without problem and they both turned on fine, but when I was installing the back ones they wouldnt turn on and now all of the lights wont turn on

Posted by on

  • bmw328i Mar 10, 2009

    I tired putting on these blue dome lights....the new dome bulbs didnt fit properly but as ignorant as i am.. i still some how put the new bulbs in..they worked for awhile..but i fiddling with one of the bulbs and all of a sudden all my interior lights don't turn on when I open the door..even when i try to turn them on manuel..and i found out my cd button doesnt work ethier....I have a bmw 98' 328i Sedan 2.8L..plz i need help..this problem is really annoyning me.

  • Mark Egan May 11, 2010

    Check the interior light fuse.

    I would be concerned that the LED lights might pull too much current if you find the fuse blown.

    Also, make sure the interior light delay circuit has not triggered. Close all the doors to allow the circuit to reset.


×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 508 Answers

Most LED lights are terminal specific. Meaning that there will be a positive and a negative side to the light. If hooked up backwards the light will not work. It will not hurt the light. Just reverse the wires to the terminals and all should be good. You are dealing with direct current and that is the difference.

Posted on Feb 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is dome light fuse for 2007 tundra.while trying g to install led all my interior lights don't work


In some applications LED lights are not recommended because they don't put enough load on a circuit to be detected.

Jan 13, 2016 | Cars & Trucks

1 Answer

Front area dome lights won't turn off killing battery life. where is the relay for this?


Can you manually turn them off by moving the selector switch on the dome to "off" position? If not, the length of time that the dome lights were on may have melted the selector switch and you cannot turn them off except by removing the bulb...and replacing the switch or dome light.......

Apr 14, 2015 | 2000 Nissan Quest

2 Answers

Why wont interior lights will not turn off on toyota highlander


If your interior lights are not turning off, you probably have the override switch turned on. This is located in front headliner area and has a light icon on it. This switch forces the interior lights on, even when all of your doors are shut, or if you are driving.

Sep 08, 2014 | 2014 Toyota Highlander

1 Answer

2000 Chrysler Neon interior lights wont turn on.


Time delay relay is the relay that allows the interior dome light to remain on for a brief time when you enter or leave the car.Usually the lights will remain on for a few minutes and then dim down and finally off.

It sounds like the daytime running lights were put on that circuit and the relay removed to keep them on constantly.
This sounds like a time and material repair that a shop will have to do. Tracing the wiring installed by the previous owner may be required to find out what was done.

Apr 12, 2017 | Cars & Trucks

1 Answer

HELP! Interior lights (map and dome) dim but do not go out. Fuse removed.


There is a short between the dome light and the door switches, this can be caused by something as simple as water damage. check all the wires and switches before you think it is the BCM.

Apr 01, 2017 | 2003 Kia Sorento

1 Answer

Dome light will not turn on


First check the bulb. If it looks good (or test good if you have an Ohm meter) then check the fuse for "interior lights."
If those look good, then you need to make sure you are getting power to the dome light connectors (using a voltmeter). If you have no power to the dome light, but everything else test out fine it is either your door switches, or interior light switch.

Jan 02, 2012 | 1998 Mitsubishi Galant

1 Answer

Interior dome light stays on while driving


Your dome light switch in in front of the driver's seat where the headlights are. It is possible that switch is bad as it should be both a turn knob switch, and by pulling on it, it becomes a head light switch. You may have to replace it.

Dec 21, 2008 | 2006 Ford Mustang

1 Answer

Dome light won't turn on.


my dome light wont turn on at all and i dont know where the fuse is iv checked all my fuses and there fine could it be a capasiter

Dec 06, 2008 | 2003 Oldsmobile Alero

Not finding what you are looking for?
2008 Jeep Grand Cherokee Logo

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...