Question about 2001 Audi A6

2 Answers

Signal lights stay on

I have a 2000 A6 4.2, At the times the signal lights stay on instead of flashing. How do I fix this problem???

Posted by on

  • cmontoya27 Feb 05, 2009

    Thanks!! I'll try it this weekend. I know if I take it to the dealer they'll want around $100 for the job, I rather do it myself.

  • KRISLAUR72 Feb 13, 2009

    THE FLASHER IS NO THE PROBLEM THE THEFT/LOCK COMPUTER UNDER THE LEFT CARPET IN FRONT OF THE SEAT IS FULL OF WATER AND SHORTS OUT I REPLACE IT WITH A USED ONE AND ALL IS WORKING FINE

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I FIXED THAT LIGHT PROBLEM TODAY UNDER THE LEFT FRONT CARPET IN FRONT OF THE SEAT IS THE LOCK/THEFT COMPUTER AND IT WAS FULL OF WATER I REPLACED IT WITH A USED ONE AND IT IS WORKINK  FINE IT ALSO MADE THE INTERIOR LIGHT FAIL BUT HAVE NOT FOUND THE LEAK GOOD LUCK

Posted on Feb 13, 2009

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 29 Answers

The flasher relay, which is actually part of the hazard switch, must be replaced. You have to pry off the trim piece around the hazard button and remove the switch/relay for replaceing. Note that the trim can be difficult to remove and the relay/switch is also tough to get out.

Posted on Feb 04, 2009

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 maxima...when headlights are on, passenger side blinker stays lit on the dash and doesn't flash at all. While the headlights are off and i turn the passenger turn signal on it then b


Plain and simple...Your turn signal circuit is shorted to your headlamp circuit. What USUALLY causes this is an incorrect light bulb has been installed in the vehicle or the light bulb was installed incorrectly. There are other possible causes of these circuits being shorted together, but 99 out of 100 of the times that I have seen this it is either because somebody just replaced a bulb or a bulb socket melted somwhere on the car. Be sure to check both the front AND rear bulbs.

Jan 07, 2012 | 2000 Nissan Maxima

2 Answers

Turn signal on 2000 Volkswagen Passat GLS


start with the flasher that should solve your problem, if not then you will need the signal switch replaced, most of the time its just the flsher, good luck

Nov 28, 2009 | 2000 Volkswagen Passat 4Motion

1 Answer

When I use the turn signal, left or right it


try replacing the signal light flasher that should solve your problem, if it does not then the signal swith needs replacing, most of the time its the flsher,start with that hope this helps,good luck.

Nov 28, 2009 | 2000 Volkswagen Passat 4Motion

2 Answers

Turn Signal


sounds like the flasher is bad,also check that all the bulbs are working

May 01, 2009 | Chevrolet Cavalier Cars & Trucks

1 Answer

Signal lights stay on


Its common for the sockets to burn up.  If you installed and the lights are still coming on.  The issue is the hazard light switch is bad.  If it were me I would replace the burnt socket anyway since it has been damaged and replace the hazard lite switch too.

Mar 19, 2009 | 2000 Audi A6

1 Answer

Left brake light stays on


Usually when your signal blinks rapidly it indicates a blown bulb.   Switch on your four-way flashers and check your bulbs at each corner.  On the brake light staying lit, check to see if the left-rear bulb is installed correctly and is the correct bulb for the application.  I've seen people force bulbs in sockets causing the braking element of the bulb to light instead of the parking element.  The braking element is much brighter than the parking element.

Mar 17, 2009 | 2000 Jeep Wrangler

3 Answers

Dodge Neon 2000, turn signal stays lit ..does not flash. Intermittant issue..any ideas??


Try replacing the flasher first. If the does not fix it then you have a bad turn signal switch.

Mar 09, 2009 | 2000 Dodge Neon

1 Answer

My turn signals stay on


You have daytime runing lights. When you turn the signal off does it just stay on or does it flash? If it just stays on and you have some light dimming problems, it is more than likely a bad ground on the front signal sockets. This can be repaired by cleaning or replacing the sockets. Another cause of this problem can be traced to bad bulbs,a very easy fix.Good luck Moe

Feb 15, 2009 | 2000 Chevrolet Camaro

2 Answers

Turn signals flash sometimes other times they just light up


replace flasher, or switch with emergency flasher to test.. Should be in with fuses or in that area.

Jan 30, 2009 | 2000 Ford Explorer

Not finding what you are looking for?
2001 Audi A6 Logo

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13213 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...