Question about 2005 Kia Sedona

2 Answers

What are the torque settings for kia sedona 1999 turbo diesel 2.9 cylinder head used bolts

Posted by on

  • 1 more comment 
  • Roberta Smith
    Roberta Smith May 11, 2010

    I have manuals for the mentor ... pride and sportage... at least for torque settings... did any of those three have the same motor ?



    Robert

  • Anonymous Mar 19, 2014

    big end head main diesel bakkie kia 2700

  • Anonymous Mar 28, 2014

    torque specs

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Stage 1 20nm
stage 2 40nm
stage 3 60nm
stage 4 80nm

Posted on Apr 27, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 188 Answers

Call your local autoparts store, they have the setting for the torque. Are call the service center of the Kia dealership, they can also give them to you. Even the internet can lead you in the right direction.

Posted on Feb 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is torque settings for head bolts on Kia pregio 2001


What are the cylinder head torque settings for a KIA K2700

www.answers.com > ... > Categories > Cars & Vehicles > Asian Cars > Kia
What is the torque specification for the cylinder head on a 2002 Kia Sportage? ... the correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs. ... Thehead bolt torque settings, on your Kia 2.7 diesel engine, is 70 pounds per ...

Aug 17, 2015 | Kia Cars & Trucks

1 Answer

I need to know how to find/set timing marks for 2002 Kia Sedona and head bolt torque specs


The head bolt torque on a 2002 Kia Optima is 45 ft/lbs of torque. Always make sure you use a good torque wrench to get it right. ------------------------------------------------------------------------------------
Original Launch X431 Master

Mar 13, 2013 | Cars & Trucks

1 Answer

1992 vw jetta 1.6 turbo diesel,what is the cylinder head bolt torque spec?


!st thing is get the revised head gasket (used on 1993 up) for this engine from VW or Felpro, always use new head bolts or a repeat failure will occur. Using the revised head gasket here is the procedure to torque the head down, it is done in stages. PLease go to this site and read the whole procedure.

Feb 07, 2012 | 1992 Volkswagen Jetta

2 Answers

I have been told that you have to replace the head bolts when replacing the head gasket because the bolts will stretch. Is this true?


If you change the head bolts that's the safest bet for trouble free operation. But, I've changed head bolts on Hondas for years and they never stretched. I know this is for a Kia. My best guess is that it's not necessary since the Chilton based manuals don't say to do this.

If the head is torqued down to specifications and it leaks, then I would say, otherwise. Even torque is more important than bolt stretch, especially if the bolts don't stretch so much that the head gasket can't be tight against the head and block.

Jan 31, 2011 | 1999 Kia Sportage

1 Answer

Saab 95 Aero 2.3 turbo. I need torque settings for big end bearings and cylinder head bolts.


CYLINDER HEAD BOATS TORQUE FIRST PASS 29.5 FT LBS SECOND PASS 44 FT LBS.THEN TIGHTEN ADDITIONAL 90 DEGREES FOR MAIN BEARINGS 15 FT LBS TIGHTEN EACH BOAT ADDITIONAL 70 DEGREES ROD BEARINGS 15 FT LB TIGHTEN ADDITIONAL 70 DEGREES. CRANKSHAFT DAMPER BOLTS 130 FT LBS.

Jan 26, 2011 | 1999 Saab 9-5

1 Answer

I need to know what the cyl head torque and rocker arm torque is for a 1998 6.5 L GM turbo diesel.


Cylinder head bolts are done in 3 steps. Step 1 - 20 ft.-lbs
Step 2 - 50 ft.-lbs
Step 3: Tighten an additional
90 degrees.
Lifter guide plate bolts 18 ft-lbs
Rocker arm shaft bolts 40 ft-lbs
Hope this helps.

Aug 06, 2010 | 1999 GMC Sierra 3500

1 Answer

Kia sportage torque range setting for cylinder head


alloy head petrol then its about 80lbs .diesel around 90 to a 100 not sure their as i just pull any head bolt down till i feel the bolt stretch but i wouldnt advise anyone to do it my way unless its another mechanic ,you know the sort of thing with a few mechanics taking the rise out of one and other ,like what do you want the torque wrench for ,you a weekend mechanic or what .

Aug 02, 2010 | 2001 Kia Sportage

2 Answers

Need torque settings for cylinder head bolts on kia seddona 2004


what engine size and code if you know it i have the torque settings.

Feb 20, 2010 | 2002 Kia Sedona

2 Answers

How much lb ft. of torque should i put on the cylinder head bolts of a 1992 toyota hilux surf turbo diesel 2lt engine.


what is the valve clearance and cylinder head torque for toyota 2lt diesel engine

kasim

Jan 25, 2010 | 1992 Toyota 4Runner

2 Answers

Torque setting cylinder head bolt 4 cylinder KIA sportage


I need the torque settings and pattern for a Kia Sportage 2.2

Nov 24, 2009 | 2001 Kia Sportage

Not finding what you are looking for?
2005 Kia Sedona Logo

697 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...