GOLF 6 2008 right mirror automatic tilt down not working
Though in the SETTINGS CONVENIENCE MIRROR DOWN menu the small square is checked, the right mirror does not automatically tilt down to the preprogrammed position when R is selected. I have followed the memory programming procedure exactly as described in the manual. Wrong procedure maybe?
An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: GOLF 6 2008 right mirror automatic tilt down not...
Sounds like it ,these fancy new cars and their electronics,a mechanics nightmare to be truthfull.try reading the manual again if still no success then take it back to dealer as you could have a fault in the controlling processor.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
As the miles and years pour on with a few examples, the side mirrors is an area that can cause some grief. Here is a brief write up on how to service the side mirrors on these cars.
Issue: Continuous clicking noise from mirror anytime the car is placed in reverse and the mirror only tilted half way down. Mirror was adjusted fine. My car is out of warranty.
Options: 1) New mirror-guessing here-$350.00-$500.00 installed. 2) Fix the current mirror using parts from another mirror. Mirror assembly does not need to be removed from car.
I picked up a side mirror for a pretty good deal off of Ebay and though it was not the correct color, I was only interested in the guts.
OK, first thing is to remove the mirror. Grab the mirror on the bottom and yank out with a quick tug towards you. The bottom of the mirror should pop out and then the top of the mirror slides out. You will then see the image below.Often times just one side of the bottom mirror comes out. Just pull on the other side. E-These two leads are for the mirror heater. Just pry them out from the mirror using a flat head. A-Those slots is where the top of the mirror slides into/out of during an R/R. B-This is where the mirror snaps into/or out of during an R/R C-Once the mirror is out of the way-remove this screw and the spring behind it. The white plastic square mirror holder can now be pulled out. Be gentle as there are two plastic worm bolts attaching this to the motor arms. Just give it a tug and work it out. D-Now remove these 3 phillip screws which hold the front and rear housing together. This is the tricky part as on the bottom right Marked E is a plastic piece that snaps both pieces together. Moving the housing up and down will get it to lodge loose. In my case the tiny little clip snapped but no big deal as the mirror goes back just fine. You may be able to pry into the inside end of the mirror by removing a plastic clip (not shown). Get this and everything else is easy.
There is a feature on the topend models called something like "Park Assist". It is suppose to tilt the mirror down when you put the vehicle into reverse so the outside mirror will show the curb. This is suppose to help in parallel parking.
The control for this feature is on the Electronic menu. This menu also has the Auto doorlocks, Alarm Chirp, and a few other gadgets. Since the Mirror control is obviously out of control you may try to turn this feature OFF. The Owners manual should show you how. I know that one of the buttons advances the Menu and another changes the setting.
If the Mirror changes settings with the door slamming, then its a problem with the cable running through the doorjam.
Hi, try to see if the cables that enter the right mirror case have any damaged insulation due to collision. But before this check a menu at SETTINGS\CONVENIENCE\ about mirrors that enables a synchronized adjustment of both mirrors. This should be set at "individual".