Question about 1991 Chevrolet C1500

1 Answer

Removal and reinstalling a water pump on a 1991 chevy C1500 PU

I am in the process of replacing a water pump. What is the best way to do it without much problem? Thanks for the help.

Posted by on

  • Anonymous Mar 01, 2009

    how do you put on the belt to a 1991 c1500

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

It is all Pretty Straight forward Except for the Studs to Mount the Fan on the Waterpump Pulley. These are Threaded on and will need to be Removed from the Old Pump and Installed on the New Pump. This is NOT Easy and will eat your Lunch, No easy way to do it. If you need any more Help, Just send me a Message and I will be right Here. Just ask! Please Rate My Response! Thanks!

Posted on Feb 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1991 Chevy c1500 2wd - left brake caliper locks up after 20 miles, releases when cooled down. I removed and replaced offending caliper but problem persists


Replace the rubber brake hoses

They are collapsed inside

You never do only one caliper,
you do both

Now you need to turn the rotors & new pads
Their fried

Mar 02, 2013 | 1991 Chevrolet C1500

1 Answer

Will engine and trans form a 1996 chevy 4x4 pu fit into a 1991 chevy 4x4 pu


WELL YES YOU CAN PUT THEM ON BUT NEED TO REPLACE THEM WITH WIREING HARNESS AND COMPUTERS AND EXUST SISTEM THATS THE ONLY WAY THEN YOU WILL HAVE PROBLEM GETING IT TO SMOG UNLESS YOU TAKE TO STATE SMOG REFERY

Nov 28, 2012 | 1991 Chevrolet Silverado 2500

1 Answer

1991 chevy c1500 stalling


Usually a problem with a dirty throttle body or a faulty idle air control valve. The computer controls idle speed by regulating how much air enters the intake thru the valve.

Oct 13, 2012 | 1991 Chevrolet C1500

1 Answer

1991 C1500: I am replacing the tie rods on my 1991 Chevy C1500...


The inner holes, the inner tierod ends go into the outer holes.

May 16, 2010 | 1991 Chevrolet C1500

1 Answer

Fuel pump constantly runs, even when ignition switch is off. 1991 Chevy C1500. Put on new relay switch, but the pump is on, even with relay disconnected


sounds like you haven't got the right relay or the replacement has failed. pull one relay at a time and go back to the rear of the vehicle and listen for the pump. make sure the key is on when you do the test.

Sep 09, 2009 | 1991 Chevrolet C1500

2 Answers

My 1991 Chevy K1500 4.3 will not start when it get hot


You possibly have a fuel pressure regulator or injector leaking down.

Aug 06, 2009 | 1991 Chevrolet C1500

2 Answers

How to change lifters in 1994 350 chevy pu


the lifters are inside the engine under the intake manifold, you must remove the intake manifold, valve covers, rocker arms, and push rods. do you have a repair manual? I suggest Haynes or Chilton, if you do not have one check your local library, they may have one

Apr 07, 2009 | 1994 Chevrolet C1500

1 Answer

1991 chevy 1500 water pump removal


I'm not so certain you need to take that pulley off to get the water pump off. All the bolts should be accessible. Aren't there holes in the pulley that line up with any hidden bolts in behind? GM is well known for doing that. Rotate the pulley until you can sneak a socket through the pulley hole and get onto the bolts you need. (Unless this is a different design).

Sep 04, 2008 | 1991 Chevrolet C1500

Not finding what you are looking for?
1991 Chevrolet C1500 Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...