Question about 2002 Hyundai Accent

2 Answers

Door Handle I got the panel detached but it is still connected by the window crank. Anyone know how to take that off a Hyundai accent?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Put thin piece of cloth between window crank, twist it around, turn window crank up and down, then pull thin piece of cloth away from the round spinable crank ball (piece you hold) this shud remove interior hidden C clip. try again if you dont succeed. those tools they sell wont fit and will scratch the door panel. I am having probs in removing the door handle and lock mechanism... removed screw, yet still attched. grrrr

Posted on Mar 07, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

It probably has a screw in the center. the cap should come off with a screw driver . if not check the side of the handle around the crank for what is called a set screw usually an allen key

Posted on Feb 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove the window crank handle from a 2002 hyundai accent I have the door panel ready to come off


I have a 2004 accent and I was able to get the window crank off using the method shown in this video.">

Oct 24, 2010 | 2002 Hyundai Accent

1 Answer

Hello I can't remove the window crank off the front door panel of my 2003 hyundai accent can anyone help me?


take a shop towel and pull it under the crank handle. then rotate rag to snag clip. it will fly off so keep an eye out for it. to reinstall put clip on handle then simlply push it back on

Jun 24, 2010 | 2002 Hyundai Accent

1 Answer

Need to install a door handle for 1998 hyundai


yes remove the panel, unhook the linkage one for the lock and one for the latch remove linkage from the handle not the latch, then remove blots holding handle then remove handle from outside the door, you will have to swap the lock to the new handle and then install new handle.

Nov 29, 2009 | Hyundai Motor 1998 Accent

2 Answers

Removing door panel on 1997 Hyundai Accent


Look under the round part of the handle,see if there is a small allen screw there,if it is unscrew it until the handle comes off.if not send a new message

Sep 06, 2009 | 1997 Hyundai Accent

1 Answer

Replacing a outside door handle on 1995 hyundai accent


Hi

Please follow these steps :

1. Remove the 4 screws and the screw in the opening mechanism.
2. Remove the cap on the lock button.
3. Remove the mirror lever cap by pulling it straigt out. It is attached with one clip.
4. Remove the door crank by detaching the C-clip between the spacer and the door panel. It's tricky and somekind of hook could be useful.
5. Pull out the plastic clips. Be careful. I think a spatula could be a useful tool.
6. Move the panel forward and up to remove the opening mechanism from the door. Then pull the mechaninsm out from the panel, turn it and push it back through the panel.
7. At this point the panel should be removed and you can see the door speaker and the adaptor. As you can see the opening mechanism remains on the door.
To put the doorcrank back just put the pieces together in the picture and push it in position.

Good luck and Do rate the solution as FixYa if found useful.

Thanks
Rylee

Mar 15, 2009 | Hyundai Motor 1995 Accent

1 Answer

Door handle broken


The Window Crank Is Held On By A Snap Ring Get A Flat Head Screw Driver And Push On The Door Panel. The Pushing Should Cause The Snap Ring To Be Easily Seen Push On One End And It Should Come Off. Hope This Helps. Also If You Google It They Say You Can Use A Rag But Ive Never Had Any Luck With It.

Jan 03, 2009 | 2003 Hyundai Accent

1 Answer

Window glass handle


If no screw in center of handle, push in on door panel & look behind handle for a clip snapped into back of handle. They have a tool for removing if you can't get to it, which should be pretty cheap at auto parts store.

Dec 28, 2008 | 2003 Hyundai Accent

1 Answer

WINDOW CRANK HANDLE


there will be a wire clip at the back of the winder, you will be able to push this out using a trim fork, or 2 thin screwdrivers.

Oct 21, 2008 | 1999 Hyundai Accent

Not finding what you are looking for?
2002 Hyundai Accent Logo

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...