Question about 1993 Toyota Camry V6

1 Answer

Replacing the cooling fan on a 1993 toyota camry

Does any body have a pic of wat it looks like?

Posted by on

  • Darrell May 11, 2010

    I can get you that pic but may I ask why you think the fan is bad?there are a few reasons the cooling fan will not come on due to faulty sensors or electrical issues.the fans are on the backside of the radiator,one is for a/c and the other is for main engine cooling.so....what problems are you having?also I need exact model and engine size please have a good day DB

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

On the '92-95 V6 Camry, the radiator fan is hydraulically operated by the power steering fluid and power steering pump. If the fan isn't running as fast as it should be, check your power steering fluid level.

Posted on Apr 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I VE CHANGED THE FUEL RELAY AND GAS STILL DOESN'T GO TO THROTTLE BODY WAT ELSE COULD BE WRONG


may need gas filter or pluged ijector try ijector cleaner if to cold frozzen put dry gas in tank if its frozzen may need to heat up gas lines at motor and carb

Dec 29, 2011 | 1984 Ford Crown Victoria

1 Answer

Wat does a control module look like on a 2007 camry


Hi,

A modern vehicle can have many control modules to control various systems.

The 1st diagram below gives you the locations of the Engine Control Module, Body ECU, Theft Deterrent ECU and Shift Lock Control ECU.

However, if you are referring to the main Electronic Control Module (ECM) which controls the engine systems, the 2nd diagram will give you an idea what it looks like (it's much larger and will usually have the engine model on the label):


11_2_2011_5_24_58_am.png11_2_2011_5_30_11_am.jpg

Nov 02, 2011 | 2007 Toyota Camry

4 Answers

Where is the throttle postion sensor located on my 1998 cavalier 2.2L?


If none of those others help you, here is the area of the engine it is in... I circled it for you . ;) 7_26_2011_3_22_41_am.gif

Jul 25, 2011 | 1998 Chevrolet Cavalier

1 Answer

My timing belt went out and i fixed it and the valves and i put new spark plugs in and now it shakes idk wat 2 doo


The timing belt may have not been fitted to correct length or tightness or the engine mounts could have snapped, Have a look at all the engine mounts as if any are defective they will allow the engine to shake the body of the car.

Jul 08, 2010 | 2002 Daewoo Leganza

3 Answers

What is the tps and where is the fuel pressure regulator


TPS throttle positioning sensor......Located on the throttle body and looks like this pic attached Top pic is TPS and Other is the regulator



Fuel pressure reg 4.3L Engines
  1. Properly relieve the fuel system pressure.
  2. Disconnect the negative battery cable.
  3. Remove the upper intake manifold.
  4. Remove the fuel pressure regulator retainer clip.
  5. Twist and pull the fuel pressure regulator in order to remove the regulator from the housing using a shop towel to catch any spilled fuel.
  6. Remove and discard the regulator seal O-ring.
  7. Remove and discard the regulator filter.
  8. Remove and discard the regulator seal O-ring.
  9. Remove and discard the backup ring.
  10. b2da892.jpg

    984e3dd.jpg


Nov 20, 2009 | 2002 Chevrolet S-10

1 Answer

Throttle position sensor location for 1993 ford E250 van


the TP sensor should always be located on the throttle body, opposite the control cable. it kinda looks like a mushroom and has a 3 wire connector attached to it. held to the side of the throttle body with 2 screws.

Pics of TP sensor here: http://www.rinis-automotive.com/shopimages/products/thumbnails/TP063_FINAL.jpg

Oct 03, 2009 | Ford E-250 Cars & Trucks

2 Answers

1991 isuzu trooper


The way the shifter is connected to the transmission.

Sep 15, 2009 | 1991 Isuzu Trooper

1 Answer

2007 quarter panel


Any body shop has a great big book with those pics in it. Say pretty please.

Jun 15, 2009 | 2007 Cadillac SRX

Not finding what you are looking for?
1993 Toyota Camry V6 Logo

695 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8732 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...