Question about 1994 Toyota Camry

1 Answer

1994 toyota camry head lights, and dashboard lights will not turn

On, however the high beam lights work when i maunally hold them on, and P, R, N, 1, 2 lights light up.. but the front, rear, and dashboad lights will not turn on.... we checked all the fuses.... any ideas on whats going on?

Posted by on

  • 1 more comment 
  • tomiko24 Feb 07, 2009

    Thank you, i ordered the part and it will be installed on monday... i will keep you updated

  • tomiko24 Feb 07, 2009

    Thank you, i ordered the part and its going to be fixed on monday. i will keep you posted to see if it works!!

  • tomiko24 Feb 10, 2009

    THIS WORKED!!! thank you so much

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

CHECK & REPLACE YOUR HEAD LIGHT SWITCH ,THIS SWITCH ARE CONNECTED TO YOUR TURN SIGNAL,HEADLIGHT LOW&HIGH BEAM

Posted on Feb 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Head light not working on high beams


Poss wrong bulb, reversed wiring or bad connection when installed short to headlight switch. Check the bulb first. & fuses

Jul 11, 2014 | 1996 Toyota Camry

2 Answers

1999 Toyota Camry . Low beams work, but no high beam.


I would guess the switch on the steering column
is worn out,thus no high beam feature

That switch & that part of the lighting system has to be tested

Best if you have wiring diagrams & electrical skills

As with almost all folks that come to any web site, I assume
everyone ends up at a repair shop,because no one says otherwise

May 10, 2014 | 1999 Toyota Camry

1 Answer

Why are Dashboard lights not working on high beam?


check the dimmer switch, I had the same problem. this dimmer switch didn`t dim on low beem but went out on high beams, turned the dimmer switch up and down/on and off and it came back on.

Apr 24, 2014 | 2008 Toyota RAV4

1 Answer

I have a 1996 toyota camry and would like to know how to adjust the headlights


OK its easy
Park you car in the garage where its rather dark and put 2 boards in front of the lights about 5 foot then turn on the lights on LOW beam now get a white pen and mark a X in the centre of the light beam and a rough line around the lights,
Now open the bonnet and behind the head lights you will see 2 knobs fitted to head light casing noe turn the top one on the Left hand side 1 turn so the light moves UP slightly and into the centre of the car MOVE the beam approx 2" to the centre then do the same to the other side light .
NOW try it out on the road in the dark both dip beam and then high beam and you might have to adjust it a bit more as dip beam must be hitting the road about 25-30 feet to the Side of the road
not to the centre.
lET ME KNOW HOW YOU GET ON
Ron

Nov 25, 2010 | 1996 Toyota Camry

1 Answer

How do i replace a low beam head light on a 94' camry ?


Things You'll Need:
  • #H11-55W and #9005 replacement bulbs (low- and high-beam bulbs for 2007 and later models)
  • #9006 and #9005 replacement bulbs (low- and high-beam bulbs for 2002-2006 models).
STEPS TO REPLACE HEAD LIGHT: Shut off the Camry's engine and set the parking brake for added safety. Also, make sure its headlights are switched off. Open the hood using the primary and auxiliary hood release latches. Locate the back of the headlight assembly and determine whether the low- or high-beam bulb needs to be replaced. Turn the headlight bulb socket counterclockwise to remove it from the assembly. Unplug the electrical connector from the back of the bulb. Carefully dispose of the bulb to prevent it from shattering or cracking.

Dec 05, 2009 | 1994 Toyota Camry

1 Answer

Hi, my 93 camry turns all lights off when I


check out light switch relay / harness

Jun 22, 2009 | 2006 Toyota Camry

1 Answer

Dashboard lights and headlights won't work on93 toyota camry le


your cars low beams and high beams are connected to a different fuse. Check the fuse for your lowbeams and instrument panel

Mar 03, 2009 | 1993 Toyota Camry V6

1 Answer

1994 Camry ..Hi beam and DRL's are intermittently working


It is in the Switch. It is tough to replace and the Dealership is the Only Place that you can get this Switch Also. Please Rate My Response! Thanks!

Jan 31, 2009 | 1994 Toyota Camry

1 Answer

My high beams stopped working,low beams still work


I have checked the Toyota web sites and the general conscientious is the high beam switch is defective.

Dec 14, 2008 | 2006 Toyota Camry

1 Answer

Low beam headlights on 2004 toyota camry don't come on, even after bulbs have been replaced. When high beams are on both lights come on.


You may have replaced the high beam by mistake. The low beam is closer to the exterior (the sides of the car)
Paul G Schmidt
Paulgms@juno.com

Jul 31, 2008 | 1994 Toyota Camry

Not finding what you are looking for?
1994 Toyota Camry Logo

424 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...