Question about 1991 Chevrolet Camaro

1 Answer

How do I get to the brake light bulb? Do I go from inside the trunk and remove the panel or from the tail light cover on the outside? I have a 91 camero

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

The only way to get to these is from Inside. You need to remove the Cover to Access these Bulbs. Please Rate My Response! Thanks!

Posted on Feb 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to change the brake and tail light on my 1996 toyota corolla . I would need a manuel on that please.


The steps to replace the brake light bulb on a 1996 Toyota Corolla:

The bulb needed is type 1157. After opening the trunk you need to remove the trunk liner on the side (right side for this example)where the brake light bulb is out. The plastic capture grommets hold the liner in place. Once the grommets are removed there is a nut (10mm) that is a bright brass-like color. This needs to be removed. Then on the outside of the trunk on the tail-light lens left side there are two nuts black in color (10mm) they need to be removed. Now the fun starts .... you needto slide the whole assembly back. You will note two black plastic posts on the rear quarter-panel, do not remove these ... these are used to hold the tail-light assembly in place since on the inside of the tail light assembly there are two rod-like protrusions that slide into these brackets. So.... remove the screws and wiggle the assembly back and it "should" slide back so that you can get at the bulb socket hat you twist to remove from the assembly. Now the bulb is visible and you reverse the order of steps to get it all back together .... a miserable design!

Sep 30, 2010 | Toyota Corolla Cars & Trucks

Tip

How to Remove Tail Lights on a Daewoo nubira Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Daewoo Nubira Cars & Trucks

Tip

How to Remove Tail Lights on a Buick Riviera Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Buick Riviera Cars & Trucks

1 Answer

How to change a tail light bulb on 2008 malibu? Not the version with the wingnuts, but the "Up Model" version that says call the dealer.



  1. Step 1 Determine how the bulb is accessed: On some models the lens (the red or white plastic part over the light) must be unscrewed from the outside, and on others the bulb is accessible only from inside the trunk. If there are no screws on the lens, you can assume that the bulb must be replaced from inside. Usually there will be a plastic cover that must be removed in order to access the bulb. There may be tabs, screws or small knobs that hold this plastic cover in place.
  2. Step 2 replace-tail-brake-1.2-120x120.jpg jQuery(document).ready(function(){ jQuery('#jsArticleStep2 span.image a:first').attr('href','http://i.ehow.com/images/a00/02/i7/replace-tail-brake-1.2-800X800.jpg'); }); Unscrew the lens on the outside, or take off the plastic cover from inside the trunk, to reveal the bulb.
  3. Step 3 replace-tail-brake-1.3-120x120.jpg jQuery(document).ready(function(){ jQuery('#jsArticleStep3 span.image a:first').attr('href','http://i.ehow.com/images/a00/02/i7/replace-tail-brake-1.3-800X800.jpg'); }); Unscrew the bulb. You'll have to push in and turn at the same time.
  4. Step 4 Take the bulb with you to the auto supply store to help you find an exact duplicate.
  5. Step 5 replace-tail-brake-1.5-120x120.jpg jQuery(document).ready(function(){ jQuery('#jsArticleStep5 span.image a:first').attr('href','http://i.ehow.com/images/a00/02/i7/replace-tail-brake-1.5-800X800.jpg'); }); Clean the connection with a wire brush and/or wipe it clean with a rag if there's any corrosion.
  6. Step 6 replace-tail-brake-1.6-120x120.jpg jQuery(document).ready(function(){ jQuery('#jsArticleStep6 span.image a:first').attr('href','http://i.ehow.com/images/a00/02/i7/replace-tail-brake-1.6-800X800.jpg'); }); Screw the new bulb into the empty socket. Again, you'll have to push in and turn simultaneously. Line up the tiny raised bumps on the base of the bulb in order to screw it in.
  7. Step 7 Replace the lens or the plastic cover.
  8. Step 8 replace-tail-brake-1.8-120x120.jpg jQuery(document).ready(function(){ jQuery('#jsArticleStep8 span.image a:first').attr('href','http://i.ehow.com/images/a00/02/i7/replace-tail-brake-1.8-800X800.jpg'); }); Test your work by stepping on the brakes and turning on the headlights while a friend watches the new bulb to make sure it lights up.

Jun 03, 2010 | 2008 Chevrolet Malibu

1 Answer

Change tail light bulb


I am not familar with your specific vehicle but most tail light bulb are replaced by unscrewing the outside lens cover. The other style has an access from inside the trunk. You remove the cover and there are the bulbs.

Feb 20, 2010 | 2005 Dodge Durango

Tip

How to Remove Tail Lights on a Chevrolet blazer Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Chevrolet Blazer Cars & Trucks

Tip

How to Remove Tail Lights on a Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Eagle Vision Cars & Trucks

2 Answers

How do you change a brake light in a 97 accprd?


1. Open the trunk and remove the taillight cover by turning the knob.
2. Determine which of the two bulbs is burned out: tail/stoplight or turn
signal.
3. Remove the socket by turning it one-quarter turn counterclockwise.
4. Remove the burned out bulb from the socket by pulling it straight out of its socket.
5. Install the new bulb in the socket.
6. Reinstall the socket into the light assembly.
7. Test the lights to make sure the new bulb is working.
8. Reinstall the taillight assembly cover.

Nov 14, 2009 | 1997 Honda Accord

1 Answer

Replacement of rear outside tail light assembly


If you're asking how do you change a taillight bulb, then follow this procedure:

Open the trunk lid.

Disconnect the connectors from the taillights (taillight bulb connectors are visible by looking inside the trunk at the back of the tail lamps.) There may be an interior trunk trim panel that you have to take off but in most cases its just a series of thumb screws that hold them in.


Brake Lights/Taillights: 21/5 W

Rear Turn Signal Light: 21 W

Back-up Light: 21 W

Rear Side Marker Light: 5 W


Turn the bulb sockets 45 º counterclockwise to remove the bulbs.


If you're removing the taillamps with the bumper off there are 3 nuts and screws that hold the taillight to the rear panel of the car that have to come off from the inside of the trunk.
Remove the nuts and screws, then remove the taillight.

hope that answers your question

Aug 15, 2008 | 2006 Volkswagen Jetta

Tip

How to Remove Tail Lights on a Audi all road Car?


The tail light consists of the brake lights, reverse lights, parking lights and turn indicator lights. 1)Tail lights at the back of your car. 2)Tail lights are on each back corner of the car. 3)There is plastic lens on above the tail lights in car. 4) Remove the screws on lens cover. 5) Remove the bulb after lens is removed. 6)The access panel will be on the inside of the trunk in the same position as the tail lights. 7)Open the trunk to access panel for the tail lights. 8) The bulb is screwed. 9) turn it counter clockwise to loosen and remove the bulb. 10) Reinsert the new bulb in the same procedure of how to removed. This will help.thanks.

on Mar 18, 2010 | Audi AllRoad Cars & Trucks

Not finding what you are looking for?
1991 Chevrolet Camaro Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...