Question about 2005 Toyota Camry Solara
My camry 2005, I've replaced battery but it doesn't work. How to fix it.
Here ya go follow the steps exactly and it will work and dont forget to rate me please,
* Remote programming
Start with drivers door open, unlocked, and no key in the ignition.
Insert and remove the key from the ignition switch twice within 5 seconds.
close and open the driver door twice within 40 seconds.
Then insert the key into the ignition key cylinder and remove it.
Close and open the driver door twice within 40 seconds.
Then insert the key into the ignition key cylinder and close the door.
Turn the ignition switch from LOCK to ON and back once and remove key
Locks should cycle once.
Within 40 seconds press the LOCK and UNLOCK switches on the transmitter switch simultaneously for 1.0 – 1.5 seconds.
Within 3 seconds after the previous operation, press either one of the switches for more than 1.0 seconds.
Within 3 seconds after the transmitter switch has been turned OFF, the LOCK–UNLOCK operation will be automatically performed once if the registration of the recognition code of the transmitter is completed correctly.
In case the LOCK–UNLOCK operation is performed twice, the registration of recognition code has failed.
Perform the registration procedure from the beginning once
Posted on Feb 03, 2009
Tips for a great answer:
Jun 13, 2012 | Cars & Trucks
Sep 02, 2009 | 2004 Toyota Camry
May 27, 2009 | 2005 Suzuki Swift
Mar 23, 2009 | 2005 Dodge Caravan
Aug 22, 2008 | 2005 Toyota Camry Solara
298 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: