Question about 2002 Dodge Intrepid

2 Answers

Dodge intrepid 2002

Where is the knock sensor in the dodge intrepid 2002

Posted by on

  • Darrell May 11, 2010

    exact model and engine and I can help. DB

  • Anonymous Mar 28, 2014

    loud knocking noice

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 1,469 Answers

The knock sensor is threaded into the block of the engine, just below where the cylinder head sits. You will need to remove the intake plenum (upper and lower) to access this part.

Posted on Feb 05, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It is located under the Intake Manifold... on top of engine block/Im working on this problem with a intrepid I bought a few weeks back(nice car) Few minor thangs that require regular maintence(Runs great other then EGR light on due tio sensor... Its one hell of a job (Bit exspensive) but a easy fix for a good mechanic... I'm glad thats all my worries are... Goodluck

Posted on Mar 02, 2009

1 Suggested Answer

cris_p
  • 62 Answers

SOURCE: where is the dodge 2002 intrepid knock sensor

remove the intake manifold ,remove radiator ,remove radiator intake and outake housing, remove fan ,remove all belts: power steering, alternator and if you have a/c, remove harmonic balancer ,remove timing belt covers, remove timing belt remove intake housinng once you have remove all the above, your freaken engine will look naked, you can see the location of the knock sensor is locate in the engine valley

Posted on Feb 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dtc Code P2314


2002 Dodge Intrepid Ignition Coil Circuit Codes: Electrical ...

www.2carpros.com/.../dodge-intrepid-2002-dodge-intrepid-ignition-coil...
Aug 13, 2008 - 2002 Dodge Intrepid 6 cyl Front Wheel Drive Automatic 130000 miles. Getting the following codes. P0353 P2302 P2305 P2308 P2311 P2314

What are 2002 Dodge Intrepid trouble codes PO442 and ...

www.answers.com > ... > American Cars > Dodge > Dodge Intrepid
What does the Error Code P0846 on 2002 Dodge Intrepid mean? .... Trouble code P2314 means: Ignition coil E, secondary circuit - malfunction Trouble code .

Oct 29, 2015 | 2002 Dodge Intrepid

1 Answer

P0325 PCM Knock Sensor


check and clean the cables in the sensor

Dec 29, 2013 | 2002 Dodge Intrepid

2 Answers

On a 2001 Dodge Intrepid if the knock sensor is bad will the car start


yes. all a knock sensor does is slightly retard timing if the cylinders start detonating (pinging)

Mar 30, 2010 | 2001 Dodge Intrepid

1 Answer

How do i replace a( map) sensor -manifold air sensor


hayes has a great bible for your car i would sugest getting 1 and read a little

Jan 03, 2010 | 2002 Dodge Intrepid

1 Answer

Where is the dodge 2002 intrepid knock sensor


remove the intake manifold ,remove radiator ,remove radiator intake and outake housing, remove fan ,remove all belts: power steering, alternator and if you have a/c, remove harmonic balancer ,remove timing belt covers, remove timing belt remove intake housinng once you have remove all the above, your freaken engine will look naked, you can see the location of the knock sensor is locate in the engine valley

Dec 29, 2009 | 2002 Dodge Intrepid

1 Answer

Knocking


stop driving and check the oil if it looks like light coloured chocolate milkshake get it towed to a repair shop and have it redone.good luck

Mar 23, 2009 | 2002 Dodge Intrepid

3 Answers

Trouble codes and why


p0325 is the knock sensor
p0301 is misfire on the #1 cylinder
p0582 and p0340 i don't know

check to make sure the oil is full and in good shape ... if it is replace the knock sensor, drive it for 20-30 miles and recheck codes.

Mar 19, 2009 | 2002 Dodge Intrepid

3 Answers

02 intrepid ticking


Most dodge motors have adjusters on the rockers for taking up slack in the valve-train. when these get worn or plugged by dirt they turn the valves from soft hydraulic to hard ticking due to a space between the lifter and the valve. If this is an overhead cam with roller lifters then these have become worn or fouled.

Sep 30, 2008 | 2002 Dodge Intrepid

1 Answer

My 2002 Dodge intrepid has it engine light on


The MAP sensor and Knock Sensor are both very easily replaced. A better scanner will tell you which sensor is going bad on your transmission. An Autozone code reader will not tell you which sensor on the trans. is acting up. Most sensors on your trans. are very easity replaced as well. They just screw in and plug it. It's worth paying to get a "real" scan done. The trans. sensors are inexpensive and you can replace any other your listed sensors yourself.

Jun 30, 2008 | 2002 Dodge Intrepid

Not finding what you are looking for?
2002 Dodge Intrepid Logo

483 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...