Question about 2003 Hyundai Tiburon
My 2003 Tiburon with a 2.7L v6 will crank and run, but idles low and will not respond to throttle. In the past while driving, the car would occasionally jump or sputter and then continue, but now while driving there is a complete loss of power, no engine rev at all when the throttle is pushed, any ideas as to what could cause this? Also, check engine light was on last week for a day but went out...
First thing that comes to my mind is a vaccum hose. My girlfriends car did this and i fixed it with a piece of 3$ hose. If the light is on you can take it to your local parts store and they can hook it up to a device that gives them the trouble code. They can then tell you what is wrong with it. Do not let them sell you any parts until you confirm that this is the problem. They sold my g/f a 300$ mass air flow sensor when the vaccum hose was all that was needed. Have a friend rev up the engine while you listen for a whistling noise under the hood. If you hear one this could be your problem. You could also have electrical issues such as a bad coil pack.
Posted on Feb 03, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 28, 2016 | 2003 Hyundai Tiburon GT V6
Jul 31, 2012 | 2003 Hyundai Tiburon
Engine stalling and rough run
issue at low speeds
is commonly caused by a dirty automatic idle speed control valve and
throttle valve. Buy a can of throttle valve cleaner (do not use
carburetor spray cleaner!) from NAPA or Carquest (made by CRC
chemicals) and spray it into the air intake while the engine is
running, use up about 1/2 the can, engine will try to stall hold the
speed up, shut it down and let it soak for 30 minutes, restart and
blow out the remaining fluid, shut it down and disconnect the
negative battery cable for 5 Min's to reset the base idle control. If this doesn't improve the problem you have mechanical problems in the engine like a low cylinder die to worn rings or leaking valve seats.
Jun 23, 2012 | 1990 Dodge Dakota
Jul 11, 2011 | 2003 Hyundai Tiburon
Mar 28, 2009 | 2003 Hyundai Tiburon
Mar 21, 2009 | 2003 Lincoln Town Car
Mar 13, 2009 | 2003 Lincoln Town Car
Feb 17, 2009 | 2003 Dodge Durango
783 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: