Question about 1999 Oldsmobile Intrigue

1 Answer

Front signals wont flash

Front turn signals dont work, the rear ones work fine, when the front turn signal does come on they just lite up but do not flash. i have alredy replaced all bulbs

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You will have to replace the plug where your bulb plugs in. Expensive about $30.00+ from your dealer. Look to see if it isn't burned inside. You can get them from RockAuto and save about $10.00

Posted on Feb 13, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Both fron turn signal flash when selecting a right or left turn, but rear lights work fine.

check the elements in the light bulbs sometimes they short together

Aug 23, 2012 | 1999 Chevrolet Lumina

1 Answer

My left turn signals don't can hear the clicker working normal and the courning lite come on. If you leave the signal switch on the turn lite will flash once in a while and also the lite on...

You most likely have a bad bulb, if the front bulb goes the rear wont work and vise versa both bulbs must be good to complete the cirrcut. Even though you have no lights you should still hear the flasher relay. Bulbs are cheap just replace both and you'll be good to go. Good luck

Aug 18, 2011 | 2001 Buick Park Avenue

1 Answer

Installed new headlights assemblys. turn signals

check once more the front turn bulbs, connections, fuse if front and rear have a separate one. Once you connect the front turn signal, blinking frequency should normalize.

Nov 08, 2009 | 1997 Dodge Caravan

1 Answer

Turn signal left front won't flah

I dealt with a similar problem on an 01 Alero (very similar car) and found that the wire that grounds the signal filament of the bulb was broken inside the harness. I tapped into it and grounded it to the chassis and resolved the problem. It's no guarantee but if you have a multimeter, check each wire's continuity to ground as well as the impedance between each of the wires on the harness, on both front signals (for comparison purposes), and it'll show you if you have a problem such as the one I dealt with.

Nov 23, 2008 | 1992 Buick Regal

1 Answer

R-side turn signal

soundds like a ground problem to me .

Oct 08, 2008 | 1994 Cadillac DeVille

2 Answers

1997 sonoma turn signal flasher

it is inside, under dash, on left side is a plastic sound protector, mine had 3 screws holding it up, drop this down and straight in you will see a 1" round thing - this is the flasher, pull it out and replace with new one (there are two flat prongs that plug in). It appears this is a well guarded secret!

Aug 26, 2008 | 1997 GMC Sonoma

Not finding what you are looking for?
1999 Oldsmobile Intrigue Logo

321 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8830 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides