Question about 2005 Pontiac Montana SV6

1 Answer

Can get the light fixure on my 06 poniac montana sv6 to come out to change the turn signal? what bolts do i remove to get it out?

Posted by on

  • awais610 Apr 25, 2009

    Cant take out Turn signal assembly, in front bumper, to replace bulb. A step by step instruction would be a great help.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

It should just be a twist fitting. turn counter clockwise.

Posted on Apr 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the flasher relay located on 2006 Montana


Relay located in right side of dash in fuse block behind access panel

Jul 18, 2014 | 2006 Pontiac Montana SV6

1 Answer

I have a 06 poniac torrent with left side signal trouble. Im the mornings and off and on thru the day the left signal light on the dash stays on. Signal wont work on the car, then when light in dash is...


You have a Burned Out Bulb on the LEFT side or the FLASHER has gone bad *(YES, it can only effect one side). It also controls the BLINKERS and FLASHERS TOO

Apr 09, 2013 | Cars & Trucks

1 Answer

How to program key fob on 06 Montana SV6 without tech 2


There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote.

Nov 05, 2012 | 2006 Pontiac Montana SV6

1 Answer

2005 pontiac montana trans service


not cleaning enough and overtightening bolts on the pan. also not removing the seal after you remove the old filter

Aug 30, 2012 | 2005 Pontiac Montana SV6

1 Answer

06 montana plug order diagram


Can anyone tell me what is the firing order for a 2006 3.5 Lt; Pontiac Montana

Aug 27, 2012 | 2006 Pontiac Montana SV6

1 Answer

How do you get access to change the front right turn signal bulb on a 2005 pontiac montana SV6?


Open the hood. If you cannot gain access, the grill of the vehical will have to be removed. This will give you access to the bulb.

Apr 17, 2011 | 2005 Pontiac Montana SV6

1 Answer

Replace front right turn signal bulb


I replaced the front right turn signal on my 2005 Pontiac Montana by reaching up from underneath. I tried removing the battery but the opening from above was too small. I was able to pull the ground effects open enough to get my arm in. When you reach the bulb holder feel for two wings on the bulb socket and give the whole socket a quarter turn to and it will release. The wires are long enough so the entire bulb holder will drop down below the vehicle so you can easily replace the bulb.
Reverse the step to put it back in. You will not be able to see what you are doing so I had someone guide me by watching from above. Took less than 10 minutes once I decided to change the bulb from the bottom. I did not need to jack the vehicle up or use ramps.

Jun 14, 2010 | 2005 Pontiac Montana SV6

3 Answers

Changing the front brake pads on a 2006 Pontiac Montana SV6


no that is only the older rear calipers on gm and others. the fronts do not have that style caliper and sound like the calipers are frozen and may be way your changing the pads. try opening the bleeder screw and then compressing them if they go then you need need brake hoses and if not you need calipers. god luck man

Dec 13, 2009 | 2005 Pontiac Montana SV6

1 Answer

Changing headlamp on a 06 pontiac montana


There should be two or 3 wing nuts securing the headlamp assembly on. Remove the nuts and the housing should just slide out for you to change the bulb

Oct 05, 2009 | 2006 Pontiac Montana SV6

1 Answer

Real right turn signal light - Pontiac Montana SV6 2005


If the 2005 Montana is similar to the 2001 Montana, I have a solution. First you'll need a hexagonal wrench (the 6-sided L-shaped wrench). The tail light assembly is held on by two screws. You'll need the hexagonal wrench to remove them, because a normal screwdriver won't do it. I also had to use a conventional adjustable wrench to get the leverage to turn the hexagonal wrench, because the screws were in there pretty tight. Once you remove the two screws, the whole tail light assembly should come off. Mine required a little force and I had to play with it a bit, but it came off without a lot of work. There will be one set of wires that connects the tail light assembly to the rest of the minivan--try not to damage that set of wires. Once you get the tail light assembly off, you'll have to take apart the assembly that actually holds the lights. No tools should be required. It's held on by four plastic catches. Just undo the catches (easier said than done, but still not too tough) and it comes apart. Then you can pop out the old light and pop in the new light. Then re-assemble. For me, it went back together much easier than it came apart.

Dec 16, 2008 | 2005 Pontiac Montana SV6

Not finding what you are looking for?
Cars & Trucks Logo

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...