Question about 2001 Ford Ranger Regular Cab

1 Answer

Would like to know if a 1997 Ranger has fuel injectors or a throutel body. I don't see where the injectors are located in the block. One more thing on this 2,3- 4 cyl It looks like it has two sets of plugs 4 on each side could this be?????? Thanks LOU

Posted by on

  • lou48s Feb 03, 2009

    Thank you very much. Wish you well in all you may do. LOU Naples Fl

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 783 Answers

It is fuel injection and yes there are 8 spark plugs you are not seeing things.The spark plugs are paired so that as one spark plug fires on the compression stroke, the other spark plug fires on the exhaust stroke. The next time the coil is fired the order is reversed.

Posted on Feb 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant find the fuel injectors 1987 for ranger 4 cylinder


not a 100% but i think that has throttle body injection that would be a unit thats looks like a carburator and has a injector in the center

Aug 07, 2012 | 1987 Ford Ranger

1 Answer

I have1997 4.3 ther.body i trun key rolling engr over get 50 psi wen stop rolling eng over feul psi go to 0psi right now


Does the truck run? 50 psi should be enough to start the truck. The fuel pump my not be able to hold the pressure. You may have an injector stuck open letting the fuel pressure drop. It could also be the fuel pressure regulator. It is very hard to find those problems because fuel injectors and regulator are mounted inside the intake. If you can find a way to block off the return line of the fuel pump you can see if it then holds pressure. Then try to block off the pressure line right after cranking to see if the pressure holds. This will let you know if the pump is working correctly.

Jan 11, 2011 | 1997 Chevrolet Tahoe

1 Answer

Check engine light is on, hooked up computer to brain and it says it was a fuel leak sensor or fuel leak evape sensor. where is this sensor located, it also only shows fuel gauge reading of 3/4 tank full...


check ur gas cap first for proper seal and or not tightened this is the usual problem the evap system is from your fuel gas cap [gas--vent lines /gas tank-evap canister-throttle body] to ur throttle body/injectors if gas cap good need to check the lines and components for a leak disconnected /cracked broken-as well as the sensors and canister

Feb 21, 2010 | 1992 Ford Ranger

4 Answers

I have a 98 Ford Ranger, 3.0L. I replaced the EGR


i would change your idle air controle its 60$ and a great start

Jan 19, 2010 | 1998 Ford Ranger SuperCab

1 Answer

Where is the fuel injector located on a 4cycle ford ranger 4x4


I'd guess with a 1989 you have throttle body fuel injection, which means that the "injector" is in the metal part that would be where the carburator used to be. Old cars had the air filter on top of the carburator.
you really can't see much of it.

Nov 18, 2009 | 1989 Ford Ranger

1 Answer

Not recieving gas to crank.


You jimmy has no throttle body, the injectors are in the intake manifold in front of the intake ports. To have them activate, you need 62 to 65 PSI at the shredder valve. Anything different will not activate the injectors and DO NOT TRY TO START THE ENGINE BY PORING GAS THROUGH THE THROTTLE BODY. It's been know for the gas to catch fire and burn up the poppet valves, (fuel injectors) which will result in a $1,500 Spider injector replacement. If you do not have the proper fuel pressure, chances are the fuel pump will need to be replaced. When replacing the fuel pump, replace the wire harness from the fuel pump to the frame, it's only $12.00 and will keep the gremlins away. Good luck and keep me posted, the other thing too that would cause the injectors not to fire is a bad ignition modulator with is located under the rotor in the distributor. Keep me posted, be glad to help you get your jimmy running again soon.

Nov 04, 2009 | 1998 GMC Jimmy

1 Answer

Where is the fuel regulator located?


what model make of vehicle,4 cylinder,6 or 8,most times its on fuel injector monifold,(part all fuel injectors are attached to) if its a throttle body injection,follow fuel line going to throttle body and u will come to regulator

Sep 26, 2009 | 1997 GMC Sierra

2 Answers

Locating the fuel pressure regulator


its located under the upper intake plenum on the side of the injector metering block

Feb 23, 2009 | 1997 Chevrolet K1500

Not finding what you are looking for?
2001 Ford Ranger Regular Cab Logo

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...