Question about 1988 Ford Bronco II

1 Answer

Remove dashboard on a 88 ford bronco 2

How to remove dash so headlight switch can be replaced

Posted by on

  • Anonymous Mar 23, 2014

    need to get to headlight switch.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 508 Answers

You don't need to remove the dash. Look under the dash where the switch is located. on the side of the switch you will see a small button to push in. While pushing in on the button pull the knob as though you were going to turn the lights on. At this time the stem should release from the switch. Undo the bezel and drop the switch down so you can see to unplug the wires. Replace wires to new switch and reverse the procedure to install. You don't need to push the button in when replacing the stem.

Posted on Feb 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlight problems in 88 Bronco II


Look for juice at lights if none ...busted wire

Nov 30, 2012 | 1988 Ford Bronco II

1 Answer

88 Bronco 11- headlights would not come on. Replaced switch, still no headlights. Found that if I pulled high beam switch on steering wheel colum, lights worked. This worked for a while, now no headlights...


It sounds like the multi-function switch in your steering column has worn out. It will have to be replaced,you can't repair it. Hope this helps.

Apr 29, 2011 | 1988 Ford Bronco II

1 Answer

Bronco II 88, High beams work, low's don't. Fuses are good, replaced the dash swith, replaced on lamp, still no low beams, any ideas???


the dimmer switch is bad if all items you replaced did not correct this dilemma you have. that is the only part that is left to replace

Feb 19, 2010 | 1988 Ford Bronco II

1 Answer

How to remove a headlight switch 1987 bronco II


reach under the dash on the headlight sw there is a small metal button
feel around the sw for it+ push it in this will let you pull the plunger out
of the switch unscrew the retaining ring + remove the switch
hope this helps, if you got any other ? gimme a shout good luck

Jan 13, 2010 | 1990 Ford Bronco II

2 Answers

Headlights in 1990 ford bronco/full size


Bronco uses a RELAY switch under the hood. Is that what you replaced?

Swap it with the A/C RELAY switch (they are the same) to check it.

Sep 04, 2009 | 1990 Ford Bronco

1 Answer

Headlights and tailights won't come on on my 1986 bronco


You may have somehow accidently unplugged the headlight switch in the dash. It should not be able to be pulled off Being an 86 it may have been replaced and the retaining tabbs damaged. Try pushing the wiring harness connector back on the switch.

Aug 04, 2009 | 1986 Ford Bronco

1 Answer

Remove dash to replace headlight switch


You can remove the headlamp switch knob ,there is a tab that you pull back on. Then you can remove the trim cover and go from there.

Feb 02, 2009 | 1988 Ford Bronco II

1 Answer

Fuse for 88' Ford Bronco


Fuse #1 20amp: Headlight Flash-to-pass; Daytime running lamps ( Canada Only ) OR Fuse # 19 40 amp maxi.; Headlamps.

Jan 21, 2009 | 1988 Ford Bronco

1 Answer

Broco


bad vacume module on top of tranny or on the side of transfer case

Oct 01, 2008 | 1988 Ford Bronco II

1 Answer

1988 Ford Bronco 2 XLT Headlight Problem


Be sure to check and see if your wiring to frame ground is good. I am not sure that you "blew" all of this at once. There should be a ground that runs from the light harness to somewhere on the core support. Just be prepared to chase wires. Electrical gremlins are always fun.

Sep 11, 2008 | 1988 Ford Bronco II

Not finding what you are looking for?
Cars & Trucks Logo

910 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...