Question about 2000 Ford Expedition

1 Answer

1999 Ford Expedition, Relay #2 is clicking loudly even after replacement was inserted. It will not even try to start, and none of the "Idiot" lights that turn on prior to starting will light up except for the Theft light?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

Relay is not supposed to click on and off. If it is, it means there is a short circuit somewhere.

Posted on Feb 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does my 1999 Ford Expedition eating starters after replacing valve cover, removed cruise control box but it is back exactly the same?


Its your starter shims. Put shims in , what is happening is your starter gear is remaining engaged even after it starts thus it tears up the starter and the gear. It may take 2-3 shims. When you replaced your first starter did it have shims? I am willing to bet it did. Give it a try and i bet this fixes your problem. Good luck

Apr 12, 2015 | 1999 Ford Expedition

1 Answer

How to replace height sensor on 1999 ford expedition


it is at the rear end and looks look a guide rail with a plug I would first try to clean the connector and apply carbon conductive grease/NOT LITHIUM==OR DIELECTRIC THERE THE WRONG STUFF/and see if it responds it's only been there for 161/2 years braving winter after winter and its either still good or done from a lack of attention needed taking it out and really cleaning just might save some$$$$$

Mar 05, 2015 | 1999 Ford Expedition

1 Answer

Its a 1999 Ford Expedition the head lights will not turn off when it is turned off


the day running light relay is at trouble,disconnect relay and check if light operate ok with the light switch

Aug 15, 2014 | 1999 Ford Expedition

1 Answer

HELP ME PLEASE!!!!! I replaced my flasher unit, and my signal lights still blink 1-2 times then nothing. My hazards and brake lights work fine. I push the signal arm down and it blinks 1-2 times then...


Have you replaced the relay because there's one of them as well with the flasher unit. I've been having a problem with my hazards not working but turn signals work fine. Maybe the arm on your steering column might be on its way out because they do get used alot.

Sep 20, 2013 | 1999 Ford Expedition

1 Answer

I HAVE A 1999 FORD


in passengers side under top of dash in relay box

Sep 11, 2013 | 1999 Ford Expedition

1 Answer

My ford expedition 1999 wont start. i have replaced the starter, and the relay and tried a bigger battery, but it still only sounds like the starter won't turn, what else should i check for


fords have a problem with the wires on the starter getting really corroded and breaking,i would check the solenoid wires with a test light while a friend tries to crank it.
does it make any effort to turn the engine over or not.
what kind of noise do you hear when you try to start it

Dec 11, 2009 | 1999 Ford Expedition

1 Answer

Having problem starting 1999 expedition makes a loud click when turn ignition have already replaced starter relay. also when turning ignition wipers and headlights come on by themselves an will not shut...


lest someone help you tapping the starter motor while you turning the ignition key
if that helps it means your starter is bad and it needs a new one

Jun 26, 2009 | 1999 Ford Expedition

1 Answer

Battery saver relay is on and do not start


One it could be the battery but if your radio and stuff works then it is not the case, the clicking is your starter trying to turn over, so that could be it as well.

Jun 03, 2009 | 1998 Ford Expedition

1 Answer

1999 Ford Expedition Interior overhead lights stay on, door locks


locate the relay for the interior lights and doorlocks and replace it.

Robert

Jan 09, 2009 | 1998 Ford Expedition

1 Answer

1999 expedition starter r and r


If the solenoid clicks loudly then the contacts are most likely burnt in the solenoid.

Nov 26, 2008 | 1998 Ford Expedition

Not finding what you are looking for?
2000 Ford Expedition Logo

Related Topics:

269 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...