Question about 2003 Hyundai Tiburon

1 Answer

Engine light comes on

The engine light comes on. i check oil levels. what could it be. how do u change the head light. not high beams just normal lights bulb.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 362 Answers

Your vehicle’s computer system has self-testing capability. When the computer senses that there is a problem with some of the components it stores the correspondent trouble code(s) in its memory and lights up the "Check Engine" or "Service Engine Soon" light to tell you that there is a problem and you will need to have the car diagnosed and repaired. This is not normally fluid level related. I believe you must take out the headlight assembly to change the headlights. There are mounting bolts you remove and the assembly pulls out.

Posted on Feb 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Head light will only work on high beam


Bulb has 2 filaments one for normal beam and one for high beam also they are 2 separate circuits so best to check both bulbs and the voltage on the high beam circuit

Dec 26, 2015 | 2002 Cadillac Deville

4 Answers

I have a 2006 civic SI. DRL indicator is on, driver side low and high beam ok. Passenger side low beam ok but DRL and hi beam not working. Any help is appreciated.


When either the high or low beam light is out in either side, DRL (daytime running lights) indicator will come on. When one bulb goes out, that's a clue the opposite bulb will burn out soon, so its best to replace both bulbs. If it was a fuse issue, both left and right side would be out. If driver side is OK but passenger side is not, then its a bulb issue. A 2006 Honda civic takes 9006 (HB4) low beam bulbs and 9005 (HB3) high beam bulbs. Cheapest is online from Walmart site-2-store. After procuring, wear latex, vinyl, or ANY gloves to keep your (corrosive) oil skin from coming in contact with headlight glass bulbs. Your skin oil will chemically react and cause shorter life span on glass bulbs. Instruction don't tell you this, so you handle with your hands, then need to replace bulbs 3 years later instead of 5 years (or more) in the future. With gloves on, pop the hood and look behind each headlight. Turn counter clockwise to unlock headlight bulb holders. Its a quarter to half turn to unlock bulb holder lock. Replace one bulb at a time so you don't confuse high beam from low beam. The wire has a tab you need to lift to pull out & disconnect wire connector. You might need a slim narrow-**** (NOT phillips) screwdriver to lift the tab; or use your house key. Snap the wire connector to the new bulb, then twist into headlight housing to secure bulb holders, then move on to the next bulb to repeat the procedure. Pict below, 9005 high beam is on the left, 9006 low beam is on the right. Handle by grasping the plastic base, not the glass bulbs. The raised potrusion on the bottom center is where the tab locks onto wire connector. Replace all 4 bulbs now, but in the future, its likely the low beam will wear out before the high beam. In the future, replace only the pair, not all 4. The factory installs inferior bulbs that go out sooner, hoping you'll take to dealership and they ******** you with higher parts-n-labor fees. As opposed to Walmart online site-2-store, it would cost you AT LEAST triple in parts & labor from dealership to replace all 4 headlight bulbs :-(
45d1f6ac-2983-42b9-a46c-30ef441b89e7.jpg

Nov 29, 2013 | 2006 Honda Civic

1 Answer

1991 Toyota Camry: How do I change the headlamp bulb on the driver's side? What steps need to be done?


Hello first start by opening your engine hood rite behind your head lamp pot is a plug socket simply twist counter clock wise and socket will come out remove bulb and replace turn clock wise to tighten up turn head lights on to check that new bulb works both high and low beam you have now changed your head lamp bulb and restored your lights

Jan 23, 2011 | 1991 Toyota Camry

1 Answer

'99 ford escort head light will dim when


The wiring harnesses in the plugs behind the bulbs are burned up seperate rear of headlight cover and inspect parts available at your ford dealer

Mar 31, 2010 | 1999 Ford Escort

2 Answers

Headlights out


You need to change the head light bulbs, they have two elements one for normal lighting and one for high beams, the low beam elements on those light bulbs are burnt, install new ones and you'll fine. Good Luck

Feb 08, 2010 | 1993 Isuzu Trooper

1 Answer

I have a 1993 Honda Accord and the head lights won't turn on. I have changed the fuze and added new bulbs. what else can it be.


do you have low or high beams?

LOW BEAMS: When headlight switch is turned on the headlight relay is energized providing voltage through fuse 37 and 38 to the headlights and the low beams come on.

HIGH BEAMS : same thing as above thru fuses 37 & 38. When the dimmer is in high, the dimmer relay provides ground to the high beams, and the high beams come on.

1. pull your flash see if lights come on?
2. check fuse 15 if good
3. check fuses 37 & 38.

Feb 07, 2010 | 1993 Honda Accord

1 Answer

F 150 Head light issue


You know the fuse for the high beams is good ( Cab fuse panel fuse # 16 ) and the pass low beam fuse ( cab fuse panel # 26 ).
Might want to check cab fuse panel fuse #28 ( this is the driver's side low beam ).

If this fuse has power on both sides ( with the low beams on ) next you can pull the headlamps, and check for power at the connectors, but depending when the last bulb change took place, I would say you need need bulbs. ( need at least 1 for the high beam out )
Confirming with a meter at the headlamp would be a good idea, before spending the money.

The bulb connector has 3 pins.
Black wire is ground on both sides
Light Green w/ Black stripe wire is high beams on both sides
Driver Lo = Dark Blue w/ white stripe
Pass Lo = Dark Green w/ Orange stripe.


Nov 16, 2009 | 2002 Ford F150 Regular Cab

1 Answer

1993 toyota corolla head & tail lights


did you check the bulb,relay or fuse for low beam

Jun 04, 2009 | 1996 Toyota Corolla

1 Answer

Need a part number for a light bulb in the Corolla CE 2004


Sylvania / Bulb - Cornering Light
921LLBP $3.49I think this is the bulb you looking part is from autozone

Dec 10, 2008 | 2004 Toyota Corolla

2 Answers

Head lights not coming on. Only day time running lights on. this car has two sets of head lights. I see other jaguar drive by with the out side head lights on but my only lights that come on are very dim...


The daytime running lights are usually the high beams, running at about 80% intensity. Your outer lights are the low beams. Check your fuse box and make sure you don't have blown fuses for the low beams. If the fuses are OK, check to be sure the bulbs are OK. If they are, I'd suspect either a dead or stuck headlight relay, or a bad lightswitch. Check the fuses and bulbs and post your results, and we can take it from there.

Jul 21, 2008 | 2002 Jaguar X-Type

Not finding what you are looking for?
2003 Hyundai Tiburon Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...