Question about 1999 Daewoo Leganza

1 Answer

No brake lights

I checked all fuses in car and under hood.took out brake switch while manually pushing it the lights worked two times out of fifty,when they did work I heard a click from under the dash neer the glove box?Is it the switch or is there a relay under the dashbord that needs to be replaced???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

Yes there's a relay box under the dash board once you open the relay cover you able see symbols on the relays replace the relay with brake light symbol..

Good luck...

Posted on Feb 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 lincoln navigator shifter locked no brake lights is there a way to test the brake switch


Yes , with a volt meter . Find the switch an back probe wires ,testing for voltage in , then press the brake pedal an check for voltage on wire going out . You'll need a wiring diagram so you know which wire is the right one's . You can find free wiring diagrams at http://bbbind.com/free_tsb.html enter vehicle info . year make model an engine size .Under system click on lighting ,then under subsystem click on stop lamp . none of the brake lights work including the high mount stop lights ? A electronic module (smart junction box) controls the lower brake lights . The high mount are controlled directly from brake light switch .

Sep 25, 2016 | 2008 Lincoln Navigator 4x4

2 Answers

2006 pontiac vibe brake light


All the lights stopping at the same time is not likely a fuse, it would be the brake light switch, the brake light switch is over the brake pedal near top of brake pedal arm under the dash. To test take a 12 volt test light ($5.00 at any auto parts store) and see if both side of the switch light the test light when the brake pedal is pushed, one side is hot with 12 volts without pushing the brake pedal down. The fuse location is in the owners manual but I am 99% sure that isn't the problem.

Jun 20, 2012 | 2006 Pontiac Vibe

1 Answer

I have no brake lights in my '97 dodge caravan le but i have taillights


Have yoiu changed/checled the lightbulbs? (In other words,do your turn signal lights work? If the front turn signal lights work, but the rear don't, then turn on your four (4) way flashers. If the rear lights still don't work, then all the bulbs are bad. It is rare for all the bulbs to be burnt out at the same time, but it does happen.

If the turn signal/four way flasher lights work, then you probably have a bad brake light switch. However, first check your owner's manual to make certain there is not a separate fuse for these lights. If there is, then swap the fuse for the brake lights for another fuse (or relay) of the same size/amperage. (Facing the hood, the power relay box is located on the right side (usually) under the hood.)

The fuse box is located under the dash, on the driver's side of the car. Usually there is a plastic cover that has to be removed to access the underside of the dash, and then there is a plastic cover that has to be removed to access the fuse box. If you don't have an owner's manual, nprmally the fuses and power relays are normally marked on the plastic covers your remove ot access the fuses and power relays.

If the fuses/relays are good, then you have a bad brake light switch. This is located on a bracket just above the brake pedal. When you push the pedal down, the switch makes contact. Disconnect the plug to the switch, and jump across the plug contacts (not the switch) with a small piece of wire, or if a piece of insulated wire is unavailable, you can use a paperclip, you won't get schocked, just make certain that the paperclip does not come in contact with a ground while you have it plugged in to the plug for the brake light switch.

If the lights stil dont work, check for power to the plug for the brake light switch. If you have power to the plug, the turn signals and four-way flashers work, then my guess would be that you have a broken power wire (probably iside the steering column, or a bad turn signal switch. If the brake lights work whe nyou jump out the brake light switch, then the brake light switch is defective.

Oct 16, 2011 | 1997 Dodge Caravan

1 Answer

My brake lights were not working so we checked all of the fuses, now we tried to crank the car and it wont start but you can hear a click from around the fuse box under the hood. car was working fine...


When you checked the fuses did you pull them out and examined them and if so was the batter connected. You could have accidentally blow a fuse by pushing it back into the fuse socket. Re-check all the fuses again but this time disconnect the battery. Any broke fuse replace and once done re-connect the batter.

As for your brake lights check the brake pedal and make sure that upon depressing the brake pad you hear a clicking sound engaging a switch to operate the brake lights. Good Luck

Jan 07, 2011 | 1998 Ford Contour

1 Answer

My brake lights dont work and i am trying to find the fuse box


The fuse block that contains the brake light relay is under the left side of the rear seat.There is also
a fuse block under the right side of the rear seat. Another behind the dash under the steering column. And one more under the hood right front corner of the engine compartment. If the relay is
good, check the brake light switch for constant 12v in and 12v out when peddle is pushed.
The brake light switch is under the dash at the top of the brake peddle. Hope this helps.














Nov 22, 2010 | 2006 Cadillac CTS

1 Answer

Brakes Lights dont work on a 2006 Chevy Silverado


I've worked on these the first drove me crazy. its the turn signal switch every thing runs thru these. head lights, turn signal, brakes. except the third brake light. it runs directly from the brake switch. go figuare

Jun 22, 2010 | 2003 Chevrolet Tahoe

2 Answers

My break lights aren't working


If all of your lights inside and out arent working, then its sounds like an electrical isuue. that cost as much as $1500 dollars. But i would start with checking the fuses in your relay box under the hood. That is usually where the lights fuse is at. Some cars have two fuse boxes and a relay box, one fuse box is inside the car, one is under the hood, and the relay box is under the hood. So i would check the relay box under the hood or fuse box if you can find one. granted your brother checked them all, it sounds to me like an obvious blown fuse... good luck

Jun 06, 2010 | 2000 Mercury Sable

2 Answers

Brake lights don't work


This sounds like a bad brake light switch, this switch is located on the bracket that holds brake pedal,you can test for power at switch,also if you remove connector and jump terminals with a wire and see if lights lite, if lights light then switch is bad,

May 27, 2010 | 2006 Hyundai Sonata

1 Answer

Turn signals, hazard flashers, and brake lights not working on 1996 crown vic. pushed in fuse and worked for minute until hood was shut then went out again. Also took in circuit breaker and had checked....


well makes no sense turnsignals are on ignition switch fed fuse and brake lights are on 24 hour fuse.. to me sounds like bad turn switch... it handles turn signals also hazzards. and brake lights have to go through the turn switch also... it is common problem.. combination switch is what they call it.. not hard to replace either....let me know

Aug 31, 2009 | 1996 Ford Crown Victoria

1 Answer

I have a 2000 Town and Country and the brake lights aren't working. I know about the brake light switch, but I want to check the fuse first. Problem is, I can't find it. There are no fuses that I can find...


Look under the hood where the fuses are. You should also find relay switches in the same compartment. They usually are silver. This could be your problem. Next, try checking the fuse panel cover and see if the diagram says where they are. There may be a fuse panel on the passenger side of the car. There is on efor the brake lights somewhere. If you don't locate it, check your owner's manual or call the dealer.

Jan 17, 2009 | 2000 Chrysler Town & Country

Not finding what you are looking for?
1999 Daewoo Leganza Logo

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...