Question about 1991 Ford F150

1 Answer

99 Dodge Dakota 5.2 y motor, have no heat.

I changed the thermostat, it working properly. Does this yr. Dodge & engine have a heater control valve?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 508 Answers

If it has a heater control valve you can easily locate it. You will find it on one of the two hoses going to the heater core. Check to be sure it is opening. Also check to be sure you heater core is not plugged.

Posted on Feb 07, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Replaced thermostat in 1995 dodge dakota and still have no heat

check your heater control valve located inline on the heater hose vac actuated close to the firewall

Jan 04, 2014 | Dodge Cars & Trucks

1 Answer

2001 dodge dakota wasnt blowing hot air from heater replaced thermostat took hoses off heater core blew out hooked up top heater core hoses filled radiator with fresh coolent until it was coming out bottom...

There is a tap or valve on the heater or hose that controls the hot water to the heater radiator, make sure this is working and not closed or broken.

Nov 30, 2017 | 2001 Dodge Dakota

1 Answer

My heater in my 2002 dodge dakota quiet working

do you mean you have no heat or no blower motor working.for the heat make sure the cooling system is full .then check the heater hoses to see if they are the same temp with the engine at operating temp.if not then you probably have a plugged heater core that will need replacing or you can try to unplug it by disconnecting the heater hoses and connect spare hoses to the spiggots and pour clr into the heater core and let it sit for 30-60 minutes.flush out and reconnect heater hoses and run to operating temp and long has it been since the thermostat has been changed.if its the blower motor check the fuses.if they are good then try tapping the blower motor to see if it starts to work if so then you will need to replace the blower motor.if not then you will have to check the motor resistor as these go bad often.

Feb 28, 2012 | 2002 Dodge Dakota Club Cab

1 Answer

1999 dodge dakota blows cold air at idle but heat warms up when revved. would like a solution to this heater problem. I live in alaska and need the heat to function properly. already flushed the heater...

Sounds as if the engine is not building up temp due to cooling system working. If engine temp gage is reading low try covering 1/3 of radiator with a piece of cardboard "Bumper side" to reduce the cooling effect.. just watch temp and out side temps if warming up outside or heavy driving remove the blocking to allow full cooling

Jan 22, 2010 | 1999 Dodge Dakota

1 Answer

Just replaced thermostat and still no heat and temp gauge doesn't work

Warm up the truck touch both heater hoses about midway in the hose . If one is hot the other cold you have no waterflow through the heater core. check the heater control valve it will be a valve in one of the heater hoses. usually cable or vacuum operated. make sure that valve is opening. if not, manually open it may be necessary to tie open to see if you have heat and if you get heat. If you do get heat determine wheather you need a new (control valve or cable or vacuum hoses. If you still have no heat chek the blend air door inside under the dash this is the door that changes the airflow direction from AC to heat it may not be working properly. Hope this helps.

Oct 17, 2009 | 1993 Dodge Dakota

1 Answer

The heater quit working in my 2003 dakota 3.9 liter v6. A liitle heat comes out, but not much even with the gauge turned on high. Fuses in truck look good, coolant level good. Where is the location of the...

The control valve could be damaged or you could have a blockage in the heater core. Locate the valve in the engine compartment and watch it while someone inside the truck moves the heater lever back and forth. You want to verify that the valve is moving to open and close the pipe into the heater core. If that checks out ok, try to flush the heater core.

Oct 03, 2009 | 2003 Dodge Dakota Club Cab

1 Answer

My 99 dodge dakota wont heat new thermostat motor

You have a bad heater valve, operated by vaccuum or cable its on the hot water line on its way to the heater core.

Feb 20, 2009 | 1997 Dodge Dakota

2 Answers

No heat in my 99 Dakota

normally if you take the two hoses coming out from the heater core you will find the heater control valve if it is under the hood and sometime they are in the truck on the passenger side down under the glove box

Jan 21, 2009 | 1999 Dodge Dakota

1 Answer

Heater control valve

Where is the thermostat in a dodge dakota 1992 located? Flushed it yesterday still just have heat blowinf ti side vents rather cool windsheild defrost. Maybe there is another problem?

Nov 19, 2008 | 1992 Dodge Dakota

Not finding what you are looking for?
1991 Ford F150 Logo

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5653 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides