Question about Jeep Wrangler

1 Answer

Hazard lights dont work but signals and break lights are fine

Posted by on

  • Bgillard481 Mar 07, 2009

    the fusebox does not say anything about hazard.. where is that fuse and would it be connected to the dome lights because they dont work either on my 2007 wrangler

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 58 Answers

Hi..there...do you check the fuse for hazard? check it first..the location fuse house is in egine room if you open the hood you will find big black box from plastic..under the cover of fuse house there is instruction about location the fuse that you need. if it broken repalce this one with same one from factory recommened...good luck..

Posted on Feb 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Chrysler Vision hazard light


on some of these models, the hazard switch operates through its own flasher fuse. if this is the case, locating and replacing the fuse ($4) should do it. Location should be in the owners manual.

Nov 10, 2013 | 1997 Chrysler LHS

2 Answers

My 2005 Crown Victoria .....Brake lights just stopped working (upper light also) All other functions work fine(hazards,turn signals & running lights) Just replaced the brake switch & there st


change the light control module. it is located under the dash near your right knee on the drivers side. this is a common problem with crown vics.

Feb 11, 2013 | 2005 Ford Crown Victoria

1 Answer

95 buick lights third light works and rear brake lights dont, turn signals work,tail lights work,new b.l swicth


Check your hazard button, you may have a bad flasher and it could be on causing the break lights not to work.

May 02, 2012 | 1995 Buick Riviera

1 Answer

1999 Lincoln Continental was in for repairs and now my turn signals and break lights dont work. Im being told it's something to do with the anti theft system because the battery was unhooked. The...


I suspect there is a problem with the turn signal/ hazard switch. turn the turn signal on left or right, if it doesn't flash, grip the hazard button and gently wiggle it around, if the signals start flashing, replace the turn signal switch. The Brake lights are wired through the turn signal switch, if the 3rd brake light works, the brake switch is OK. I don't think it has anything to do with the anti theft system (at this time)

Sep 21, 2011 | 1999 Lincoln Continental

1 Answer

I have a 1995 honda accord and the break lights will not go off i put a new break switch on the car and it didnt work i also checked all the fuses and dont know what it could be


it could be a turn signal relay that is stuck. do your turn signals work, I know that sounds weird but for american cars the turn signal interrupts the brake light so if ur turn signals are not working properly it might be, also there is probably a brake/hazard relay

Aug 18, 2010 | 1990 Honda Accord

1 Answer

When the blinker is flipped up or down on the column the tail lights dont respond. But the brake lights and the hazards still work fine. Whats the problem?


The turn signal flasher relay may have a problem.Turn on the hazards and follow the clicking sound to the source and usually the hazard flasher and turn signal flasher are very close to each other.Remove the one that is clicking and put it in place of the turn signal flasher.If the Turn signals then work you will need to purchase a new turn signal flasher relay.They are usually just a few dollars.

Jul 29, 2010 | 1986 Ford F 250

1 Answer

2001 GMC Jimmy break lights not working but all


Check the brake light switch should be a orange wire with 12v then a white wire with 12v when the pedal is pressed.If htat cks good then ck the hazard switch by moving it up and down and wiggeling the knob with the brake pedal pressed if they start working then your multifunction switch is bad and needs to be replaced.

Feb 20, 2010 | 2001 GMC Jimmy

1 Answer

2004 monte carlo. Turn signals dont work. The stalk still works with other functions, such as wiper, brights. The fuse is fine. Could it be a bad relay? When u push the stalk up or down nothing happens on...


try pressing the hazards on and off if they still don,t work replace the flasher unit. it is built into the hazard switch( all one unit ) change this and all will be good.

Aug 30, 2009 | 2004 Chevrolet Monte Carlo

2 Answers

Signal lights dont work when breaking


No,this is not normal,this normal when the emergency flashers are on,but not the turn signals.Check the bulbs(all of them)in the rear tail light assembleys.If you can not tell which bulbs are bad,replace them all.Does this vehicle have a trailer light plug?If it does,it could be in it.After the bulb replacement(look at bulbs in your hand to see if filiments are burned)replace the turn signal flasher.To find it turn key on,and left or right turn signal on,and listen,and feel for it under dash around the steering column.

Aug 23, 2009 | 1988 Jeep Comanche

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

71525 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7029 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...