Question about 2005 Chrysler Town & Country

1 Answer

Automatic door locks will not work.

The automatic door locks will not lock the doors when moving. I cannot lock or unlock doors with remote key button. The batteries have been changed in key remote. If the doors are unlocked I can use the key remote to open the sliders and the rear deck lid. If the doors are locked the key remote will not open the sliders or the deck lid. If I disconnect and reconnect the van battery all the remote key functions work for a day or two then they quit working again.

Thank you

Posted by on

  • Anonymous Mar 26, 2014

    camry 2003 opener remote battery
    changed does not work

  • Anonymous Mar 31, 2014

    car is completely dead, windows & doors can't be operated with remote key

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 137 Answers

You need to take it to the dealer and have them check the bcm for codes.... also have them check to be sure you have the latest software in the bcm.. its possible that you just need a software update... there are several TSB's covering the concern you have..... it can be a very simple fix with software or even a stuck lock switch may need to be replaced... without the proper diagnostic codes being read from the bcm all that can be done is guessing..and that can be expensive...

Posted on Feb 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

An 08 prius keyless entry doesn't work, changed the batteries, pushed the disable button and reset it, still no go. Any ideas?


1. Start with the key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.
2. Perform these steps within 5 seconds.
A. Insert the key into the ignition and Pull key out twice (Do NOT Turn)


3. Perform these steps within 40 seconds.
A. Close then open the drivers door twice.
B. Insert the key into the ignition(Do NOT Turn) Pull key out.
4. Perform these steps within 40 seconds.
A. Close then open the drivers door twice.
B. Insert the key into ignition and leave it in ignition.
C. Close the drivers door.
D. Turn the ignition to ON (Do NOT Start) then back to OFF.
E. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should lock then unlock automatically
indicating successful entry into programming mode.
Return to step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door
locks should lock and then unlock once indicating successful programming. If
the door locks cycle twice, repeat steps A and B in step 6 as the remote was
not accepted.
C. Repeat steps A and B in step 6 for each new remote.
7. Open drivers door.

Jul 17, 2014 | 2008 Toyota Prius

1 Answer

Central locking will not work from key but will unlock if manually lock car


The automatic door actuator must be responsible or open all door including the boot and close them one after the other firmly,see if it work and if it does not work your door actuator need replace.

Feb 22, 2014 | Cars & Trucks

1 Answer

I have a 2004 VW Passat XLS. I tried to lock the doors with the remote and it did not work. I tried to manually lock the car by inserting the key in the door and it will not work. While inside the car I...


This is a wild guess, but it sounds like the switch that controls the door is constantly trying to open the door. It could be the door switch. Try locking the door with the door switch and then hold the lock slightly down to see if it is a mechanical failure in the switch. If not, the remote system may be sending the unlock. You could always pull the fuse for the automatic locks and see if the key will lock/unlock without problem. But then you'd never have remote entry.

Sep 29, 2013 | Volkswagen Passat Cars & Trucks

1 Answer

Xj8 door lock


You need to replace the lock actuator in the doors that are not locking/unlocking with the door switch/remote. If the remote works for most of the doors then it is fine. The actuator is what moves the lock when it gets the signal from the remote or door switch to move it.
Good luck

Jul 11, 2013 | Cars & Trucks

1 Answer

Horn honks doors lock be self


does this help? look in owners manual for how to turn "on or off" the auto lock feature.


Automatic Door Lock/Unlock
The automatic door unlock function is a vehicle personalization feature with the following 3?programmable modes of operation:
1. All: All of the doors will automatically unlock. 2. Driver: The driver's door will automatically unlock. 3. None: The doors will need to be unlocked by a door switch command or by pressing the the lock button on the RKE transmitter. The All or Driver modes may also be programmed as to when the automatic door unlocking will occur.
1. Key Off: The door(s) will unlock when the key is turned off. 2. Shift to Park: The door(s) will unlock when the vehicle is shifted into P (Park). The delay lock function may be enabled or disabled. When the function has been disabled, the doors will only lock by a door switch command or by pressing the the lock button on the RKE transmitter. When enabled, the doors will not lock until five seconds after the last door is closed.

Oct 21, 2011 | 2007 Chevrolet Malibu Maxx LTZ Hatchback

2 Answers

How do I get my key remote to lock/unlock my toyota rav4 2002 model? I changed the battery because I thought that was the problem but it is still not working. The red light on the remote comes on but then...


You will need to try reprogramming the remote 1st, below is the complete procedure. If the reprogram doesn't restore function then you will need the dealer to test the keyless entry system, you may have a bad module or remote (only applies if both remotes don't work).

Start with the key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Perform these steps within 5 seconds.
A. Insert the key into the ignition(Do NOT Turn) Pull key out.
B. Insert the key into the ignition(Do NOT Turn) Pull key out.

3. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into the ignition(Do NOT Turn) Pull key out.

4. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Close the drivers door
D. Insert the key into ignition and leave it in ignition.
E. Turn the ignition to ON (Do NOT Start) then back to OFF.
F. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should lock then unlock automatically
indicating successful entry into programming mode.
Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door
locks should lock and then unlock once indicating successful programming. If
the door locks cycle twice, repeat steps A and B in step 6 as the remote was
not accepted.
C. Repeat steps A and B in step 6 for each new remote.

7. Open drivers door.

Aug 24, 2011 | 2002 Toyota RAV4

1 Answer

Automatic side door will no longer open with remote or console button in car. Also, both side door's locks will not pop up using all of our 3 remotes (1 door is automatic, 1 is manual). Lastly, the back...


Did these doors quit at the same time or over a period. It seems that the actuators for the locks have gone bad. With the mentioned doors, that's a lot weight for the actuators to unlock and pop open. With the remotes and console not working , that's more reason to think the actuators are the problem.

May 02, 2010 | 2002 Chrysler Town & Country

1 Answer

How do you repair the automatic door locks on a 96 Honda Odessey? They make clicking noises after locking the door. the key is worn and I cannot unlock the drivers side door.


Replace the key.
you should have a remote lock/unlock key fob, dose it not work?
Make sure that your battery and cables are in good shape, if batt is low or you have corroded cables there will not be able to activete all the way.
If this won't work then remove the door pannel an inspect the linkage, it may not be making full contact.

Apr 19, 2010 | 1996 Honda Odyssey

Not finding what you are looking for?
2005 Chrysler Town & Country Logo

772 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...