SOURCE: 1988 honda accord 2 door I need to change clutch
no remove gearbox but you might need to lower subframe to gain access ,use an engine lift to support gearbox or a block and tackle so you can pull it out and not have to lower it
SOURCE: ac compressor clutch relay 1991 honda accord
Difficult to describe, but I will give it a try.
Inside the driver's side fender, close to the front of the car, there is a bracket that is held in place by one bolt, but which has a short horizontal bar as part of it which has two large clips encircling two cylinderical devices which have wires clipped into them at the bottoms. The one closest to the front (radiator) is the compressor clutch relay. The other one is the condenser fan relay.
Hope this helps you find it.
SOURCE: 2009 Honda Accord Coupe power outlet problem
yeah you can check your fuses on the driver side under the dash board, you will find one of them blowed.
SOURCE: 1999 honda accord clutch
Yes, I would get the dealership parts including the clutch plate, throw out bearing, and any other parts that seem to wear out when doing a clutch job on a Honda.
Get the service manual to learn specifically how to do this job.
Good luck.
108 views
Usually answered in minutes!
×