Question about 1991 Buick Park Avenue

1 Answer

1991 buick park ave. ign. barell wire broke

The security system wont let this car run it has a broken wire I saw when I took out the ignition barell, can this be repaired or do I need to go to the dealer and buy a new barrel and keys and have them try to change the key chip to match my security code? thanks jefbnntt@aol

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I had same problem with a broken white wire.you need to go to dealer with you old key to match that chip with new keys and purcase a ignition switch at the same time

Posted on Feb 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My buick park ave will not start batary tested good so did the alternator before it broke down when i was driving it would just stop running no warranig thanafter 3 min i would re stated the car and it...


The first thing I would do is get a code reader. Start there and see what info it gives you. The next thing I would do is check the wiring. Start with the neg battery cable. make sure it is connected tightly at the body of the car, and the battery. Next check the wiring going to the ignition module. On older cars the wires get hot and the plastic coating will melt and the wires will touch causing a short.

Nov 20, 2010 | 1991 Buick Park Avenue

1 Answer

I have a 1991 buick park ave ultra,what is the firing order


The firing order is 1-6-5-4-3-2 and the ignition wires will attach to the ignition coils according to what type of ignition system your vehicle has. here are some imges to help assist you.


0bc770e.jpg

d7a2fcf.jpg


3b899f6.jpg

Sep 11, 2010 | 1991 Buick Park Avenue

3 Answers

Is it true that there is an anti theft system on this car and if it is would it cause the car not to start


NOPE 1991 MODELS DID NOT HAVE ANTI THEFT SYSTEM.YOUR PROBLEM MORE LIKELY THE BATTERY OR STARTER .CHECK BATTERY CABLES MAKE SURE THEY ARE CLEAN TIGHT ALSO CHECK BATTERY VOLTAGE IT SHOULD BE 12.5 VOLTS.IF NOT BATTERY BAD IF BATTERY OKAY THE STARTER SOLENOID OR STARTER DEFECTIVE.

Jul 16, 2010 | 1991 Buick Park Avenue

2 Answers

1991 buick park avenue with a 3800 series 1 sudenly has no spark to plugs. It has brand new spark plugs, spark plug wires, coil pack, alternator, fuel pressure regulator, fuel filter, serpentine belt, pcv...


ive had this problem before and it was a small wire on the ignition key cylinder that had broken but we fixed it by buying a new cylinder and wire

Apr 06, 2010 | 1991 Buick Park Avenue

3 Answers

I have a 1995 Buick Park Ave Ultra. The car has power but will not turn over. I was told by one shop that it might be the V.A.T.S. system and by another that it is the IGNITION CONTROL MODULE.


Make sure the battery cables are clean and tight on the battery. Check to see if the wires to the starter are tight. Try starting it in neutral to make sure the safety switch is being make. Also hold it up into park and try.

Mar 22, 2010 | 1995 Buick Park Avenue

1 Answer

1994 buick park ave, wont crank over,


Pass key is the security system which disables the car if it is stolen. You need the remote or a key with a chip to start the car. go to a dealer, prove ownership with registration and they will be able to help you out

Sep 09, 2009 | 1995 Buick Regal

1 Answer

Can some one help me I replace my ign. module, coil pac, crank sensor, cam sensor, & timing chain wont start HELP PLZ!!!!!


It is your security system for the ignition, only the dealership can repair this. Look at your dash and see if the security light is on when cranking or if it is flashing. This is a common problem with GM cars it's all over the web.

Aug 27, 2009 | 1991 Buick Park Avenue

1 Answer

1991 buick park ave. security system set off,


Did you try the drivers door lock cylinder?

Jul 19, 2009 | 1991 Buick Park Avenue

1 Answer

95 buick park ave car running radio off,igniton on accradio works


Who ever took the radio out is guilty. The power wires must have been reversed. One is supposed to have power all the time, (memory)and the other just when your ignition is on. Apparently, they got mixed up.

May 18, 2009 | 1995 Buick Park Avenue

2 Answers

Temp sensor for 1991 park ave


I have a 1991 buick century that keeps stalling but starts right back up but know it wont start at all

Jun 19, 2008 | 1991 Buick Park Avenue

Not finding what you are looking for?
1991 Buick Park Avenue Logo

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...