Question about 1999 Toyota Corolla

1 Answer

Door locks don't work

I change the master switch and power windows work just fine and still door locks don't work

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

Its the door lock actuator that needs replacing / Please rate my response thank you very much

Posted on Feb 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power windows don't work


the master window lock switch is stuck on the off possition test for power in and out, remove and replace

Jan 07, 2013 | 2009 Kia Spectra

1 Answer

1998 toyota driver side window switch will not run any windows but lock button still works


"...when master switch remove, NO WINDOWS WORK"
This is correct--your master switch is part of the total circuit for all the windows to operate. Assuming the other windows work on their "relative" switches (passenger switch works passenger window etc.), you can assume this; it is not a relay problem. You only have one relay--a bad one would affect all window switches.
First, check your ground wires! Disconnect, clean (abrasively) and reattach)
Second, use a test light (starting at the master switch terminal) to determine if and why it's not getting voltage.

Jan 01, 2013 | 1998 Toyota Avalon

1 Answer

Power windows not working


1 does the led's light up on the master window switch [drivers side] 2 when you rocker the drivers side down can you hear a audio click down under the steering wheel. the i/p fuse panel is down there where you rest your left foot.3 power is from battery saver relay to master ins. relay to one touch window relay. this is the one you should hear click. the back side of this fuse panel calls out the locations down there. the owners manule also helps some.4. if you take the interior door cover off remove the screw on extenstion on door lock and one screw under plastic button where you pull the door shut.arm rest support bracket. the rest is held in place with snap in plastic buttons [christmas trees like]. the door latch unlock should slide out of the opening when you slide it froward.there are 4 male/female electrical connections, 2 to the master door switch.one to the power/heated mirror, 1 to power locks. 5. don't unsnap them yet.with a test light you can check for battery voltage. on the master door switch the blue/black tracer wire should be hot[12 volt dc]. at all times. put one end in the backside and the other to a bolt or rivet on the door. the light should come on.next with one end on the blue/black tracer and one on white/black tracer rocker driver side up/down switch, the light should come on.there are only 13 wires on the master window switch 2black wires are ground, 2blue/black tracer[hot] 1 red/blue tracer should be [hot] when you unlock the window lock rocker switch.know the passanger and back seat switches should work. switch it to lock and they should only work from the driver side master switch.the 8 wires left are 2 for each window one up one down.try this with a friend it makes it easyer. good luck doug.

Sep 10, 2012 | 1997 Ford Taurus

1 Answer

Only the driver side window works the passager door window ad both real windows don't work what is the problem?


If the lock out switch is not on, I would check for power and ground at the driver's master switch.

Sep 03, 2012 | 2001 Oldsmobile Aurora

1 Answer

1993 Bighorn Passenger window not working


There could be a lock controller somewhere that is not working.
I don't have a wiring diagram for your truck.

Generally, the power window motors are grounded thru the doors, or the switches provide ground. In your case the motors are probably grounded thru the doors.
The master switch "overrides" the door switch so you have extra wires that do the same thing. The E wire probably gives the door switch power and the A and C are up and down. The B and D are override circuits from the master that bypass the door switch.
Sometimes the motor is grounded thru the switch then thru the door.

Jun 28, 2012 | Isuzu Trooper Cars & Trucks

1 Answer

Doors wont lock. Windows won't work. Car thinks the door is locked because when I open the hood alarm goes off. Security light is flashing when doors are closed. Locks don't engage when driving...


Window fuse's and relay's may be up under driver or passenger side dash or behind glove box, under the hood and even under the seats, and finally on the ends of the dash. All passenger power windows and locks are controlled thru and get power from the master control switch on the drivers door. Could be a broken wire in the rubber boot going from the door to the body. You will have to eliminate each till you find the culprit. Check that all switches return to neutral when released. It could also be the body control module.

Aug 28, 2011 | 2003 Volkswagen Jetta TDI

1 Answer

1993 Buick Regal - electric door locks, my Buick driver's side door stopped unlocking the door by the switch. It was only the driver's door all other doors work fine. I changed the actuator and then the...


did you try changing the master switch(controls all windows and locks)? i would hook it back up to the way it was and change that master switch

Dec 06, 2009 | 1993 Buick Regal

5 Answers

DRIVERS SIDE POWER WINDOW 2006 CHEVY EQUINOX


Check inside wiring by the driver's side door hinge. Remove the rubber boot and you will find broken wires. Make a splice and you are fixed!

Dec 27, 2008 | 2003 Chevrolet Equinox

Not finding what you are looking for?
1999 Toyota Corolla Logo

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...