Question about 1999 Dodge Ram

1 Answer

I am Having a problum removing oil coolent lines from raditor . do you remove the entire line from top to cooler or ?? same with bottom

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 319 Answers

I am asuming you are going to remove the radiator. spray the **** out of them with some solvent for breaking down rust and corrosion. keep spraying and spraying once about every hour for a day. Then remove all lines going to the radiators.

Posted on Feb 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove radiator on 2000 Lincoln Continental


RADIATOR
Removal
1. Disconnect battery ground cable.
2. Drain engine cooling system as described.
3. Remove engine air cleaner.
4. Remove upper radiator hose from water bypass tube.
5. Remove radiator overflow hose from radiator and fan shroud.
6. Remove transmission oil cooler line from oil cooler inlet fitting.
7. Remove nuts retaining A/C condenser core to the radiator.
8. Disconnect engine control sensor wiring from the auxiliary electric cooling fan motors and the CCRM.
9. Raise vehicle on hoist.
10. Remove splash shield from lower radiator support and front sub-frame.
11. Remove lower radiator hose from radiator.
12. Remove oil transmission cooler line from oil cooler outlet fitting on radiator.
13. Remove retaining screws for power steering/transaxle oil cooler and position cooler aside.
14. Support fan shroud, radiator and A/C condenser core with a suitable jackstand. Remove lower radiator
support.
15. Position jackstand aside and carefully remove radiator and fan shroud.
16. Remove two retaining bolts for fan shroud at top of radiator and remove fan shroud from radiator.
17. Remove upper radiator hose from radiator.
NOTE: Loosen transmission oil cooler lines while securely holding radiator
connector with a back-up wrench.
NOTE: Loosen transmission oil cooler lines while securely holding radiator
connector with a back-up wrench.
18. Remove the radiator.

Oct 21, 2016 | Lincoln Cars & Trucks

1 Answer

How do I change the radiator on a 96 lincoln contiental 32v intech V8 ?


RADIATOR
Removal
1. Disconnect battery ground cable.
2. Drain engine cooling system as described.
3. Remove engine air cleaner.
4. Remove upper radiator hose from water bypass tube.
5. Remove radiator overflow hose from radiator and fan shroud.
6. Remove transmission oil cooler line from oil cooler inlet fitting.
7. Remove nuts retaining A/C condenser core to the radiator.
8. Disconnect engine control sensor wiring from the auxiliary electric cooling fan motors and the CCRM.
9. Raise vehicle on hoist.
10. Remove splash shield from lower radiator support and front sub-frame.
11. Remove lower radiator hose from radiator.
12. Remove oil transmission cooler line from oil cooler outlet fitting on radiator.
13. Remove retaining screws for power steering/transaxle oil cooler and position cooler aside.
14. Support fan shroud, radiator and A/C condenser core with a suitable jackstand. Remove lower radiator
support.
15. Position jackstand aside and carefully remove radiator and fan shroud.
16. Remove two retaining bolts for fan shroud at top of radiator and remove fan shroud from radiator.
17. Remove upper radiator hose from radiator.
NOTE: Loosen transmission oil cooler lines while securely holding radiator
connector with a back-up wrench.
NOTE: Loosen transmission oil cooler lines while securely holding radiator
connector with a back-up wrench.
18. Remove Radiator

Apr 19, 2015 | 1996 Lincoln Continental

1 Answer

How to replace oil; cooler on this year


  • Service and Repair
Oil Cooler Replacement

Removal Procedure

  1. Raise and support the vehicle. Refer to Vehicle Lifting.
  2. Drain the engine oil and remove the oil filter housing.
89116492

  1. Loosen the oil cooler outlet (1) and the inlet (2) lines from the engine block.
  2. Lower the vehicle.
  3. Remove the intake plenum.
  4. Remove the intake manifold.
89116493

  1. Disconnect the following electrical connectors from the water crossover:
    • The engine coolant temperature sender (2)
    • The engine coolant temperature sensor (4)
84936658

  1. Remove the water crossover bolts (1).
  2. Remove the water crossover upper and lower seals (2).
84942881

  1. Loosen the upper heat shield bolts on the left side of the exhaust manifold.
89116496

  1. Remove the oil cooler outlet line from the engine oil cooler.
  2. Remove the oil cooler inlet line from the engine oil cooler.
84942883

  1. Note the positioning of the 4 seals.
84972057

  1. Position the oil feed and return,lines out of the way and secure with mechanic wire.
  2. Remove the engine oil cooler, inlet and outlet nuts (1).
  3. Remove the engine oil cooler cover bolts (2).
84942883

  1. Remove the engine oil cooler cover.
  2. Remove the engine oil cooler.
  3. Clean all sealing surfaces.
Installation Procedure
84972056

  1. Install the engine oil cooler.
  2. Apply a 2 mm (0.08 inch) bead of RTV silicone sealant, GM P/N 12346240, in the groove around the engine oil cooler cover.
  3. Install the engine oil cooler cover.
Notice: Refer to Fastener Notice in Service Precautions.
84972057

  1. Install the engine oil cooler cover bolts (2). Tighten the engine oil cooler cover bolts to 30 Nm (22 ft. lbs.).
  2. Install the engine oil cooler inlet and outlet nuts (1). Tighten the engine oil cooler inlet and outlet nuts to 20 Nm (15 ft. lbs.).
  3. Reposition the oil feed and return lines.
84942883

  1. Install the oil cooler outlet and install the oil cooler inlet lines to the engine oil cooler. Use 4 new seals.
Tighten the oil feed and return lines to 30 Nm (22 ft. lbs.).
84936658

  1. Install the water crossover:
    • Position the crossover.
    • Install the upper and lower seals (2).
    • Install the water crossover bolts (1). Tighten
Tighten the water crossover bolts to 30 Nm (22 ft. lbs.).
  1. Connect the electrical connectors at the following locations:
    • The engine coolant temperature sensor (4)
    • The engine coolant temperature sender (2)
  1. Install the intake manifold.
  2. Install the intake plenum.
  3. Raise the vehicle.
89116492

  1. Install the oil cooler outlet (1) line to the engine block. Tighten the oil cooler outlet (1) line to 30 Nm (22 ft. lbs.).
  2. Install the oil cooler inlet (2) line to the engine block. Tighten the oil cooler inlet (2) line to 30 Nm (22 ft. lbs.).
  3. Install the oil filter housing to the engine block. Tighten the oil filter housing to 45 Nm (33 ft. lbs.).
  4. Lower the vehicle.

Dec 22, 2014 | 2001 Cadillac Catera

1 Answer

How to replace a radiator


You have to drain the unit by unscrewing petcock at the bottom. Then remove radiator hoses, transmission lines and oil cooler lines. Plug lines with rubber nipples. Remove top radiator shroud bolts and bottom and side bolts on shroud. Then remove and replace radiator.

May 10, 2014 | 2004 Isuzu Axiom

1 Answer

2003 chevy impala radiator removal process


Removal is through bottom of vehicle first drain the coolant and remove hoses if oil cooler equiped then drain engine oil as well and remove lines from the radiator( if it has an oil cooler radiator will have 2 small hard lines on the radiator one on each side) next remove mounts from bottom of the radiator there shouldn't be any top mounts since its basically a "pinch" mount now you should be able to remolve the radiator by sliding towards the engine just enough to clear the radiator cross member if planning to reuse the radiator take special care not to knock on the motor or any bolts part etc since its very easy to puncture

Jan 05, 2012 | Cars & Trucks

1 Answer

Replace radiator


It's not alot of fun. Pictures that you'll find in a repair manul will be alot of help as a picture is worth a thousand words. The covers over top of the raditor need to be removed and the coolant drained. Thjeir will be a fan bolted to the back and it'll need to be disconnected and unbolted and removed. With it out of the way you will be able to see the hoses theat hold the coolant they need to be removed fromt he engine or the raditor as it appears mose easy. you can take them off the other end after you get the raditotr out as they will be easier to get to after out. if you haVE NEW HOSES TOO YOU MIGHT LIKE. to cut them and work on removing them afer it's out. The smaller lines are transmission cooler lines and engine cooler lines ( oil) *** yu remove these they have fluild in them and ned to be plugged or catch pan the drippings as to not make too big a mess. Used bolts of the correct sizes help make the plugs. the big hoses just drain them in a pan. Don't cut any hoses till you have the new ones and be sure thier the right ones as the stroe will say thier the right ones but maybe not for your car so be careful. Sometimes you have to show the old part to get the right one. This is true with the raditor too.

Jul 11, 2011 | 1998 Oldsmobile Silhouette

1 Answer

Porsche911 1984 front hose pipes to oil cooler. am renewing having difficulty removing old ones.any suggestions


hello there
what exactly is you problem?Are the lines rusted?You are talking about the 2 small oil lines on the top of the front cooler,right?
let me know i will be glad to help you

proporsche@yahoo.com

proporsche

May 25, 2011 | Porsche 911 Cars & Trucks

2 Answers

Replace radiator


easy job considering ,i done one a while back but the cost of the radiator was astronomical just over 500 euros ,remove the fan on the back of the radiator ,the top piece of metal over the top of the radiator ,and comes out but the problem i had was with the hoses as they have a sort of push in clamp ,also the oil cooler feed pipes from the auto box and the engine oil cooler pipes ,now the engine oil cooler connections were just screw on but the gearbox cooler pipes have a special plastic retaining clips and these broke on me and the only way i could repair them was to buy new ones which come with the whole pipe from the gearbox and they were very expensive indeed ,also their are a few different versions as well ,all this because of a silly plastic clip .Also i had to unbolt the AC radiator from the main radiator as well .but the hardest part was the gearbox cooler pipes

Sep 06, 2010 | 1998 Jeep Grand Cherokee

3 Answers

I have a 97 Lincoln Continental. I am trying to replace the cooling fan. I have the shroud loose but can't figure out how to get out. Any help would helpful. Thanks


YOU NEED TO TAKE IT OUT FROM THE BOTTOM REMOVE PLASTIC SHROUD THEN DRIAN AND PULL LOWER RADIATOR HOSE FROM RADIATOR AND THE REST IS PRETTY SELF EXPLANATORY MAKE SURE YOU BUY THE CLIPS FOR THE WIRRING BEFORE YOU EVEN START

May 09, 2009 | 1997 Lincoln Continental

Not finding what you are looking for?
1999 Dodge Ram Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...