Question about 1994 Chevrolet S-10 Blazer

1 Answer

My motor is still hesitates when im idling and accelerating

I changed my o2 sensor this morning and it didnt help my hesitation problem, im also having a problem with my transmission shifting, i noticed that right where my transmission connects to my crank there is a sensor there and there is transmission fluid leaking all over it could that be the problem and what is that sensor?

Posted by on

  • mac_91806 Feb 01, 2009

    i changed my fuel filter and that helped it alot

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,674 Answers

Sounds like crank sensor & yes that could cause problems. try spraying it & it's connector with contact cleaner, or similar safe for electrical spray cleaner.

Posted on Feb 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 Plymouth Voyager 3.3 dies at idle hesitates during acceleration


It should show up with a P code as it misfires. If it doesn't, check the engine temperature sensor and O2 sensor.

Mar 01, 2017 | Cars & Trucks

1 Answer

96 Camry LE V6 that hesitates the first thing in the morning,


It sounds like a dead spot in the TPS (throttle position sensor) it is the only sensor that is subject to physical wear (1996 its old replace it) also the 02 sensor is old too.

May 24, 2017 | 1996 Toyota Camry

1 Answer

2004 ford escape - feels like hesitation,or sputtering when acceleration, sometimes just random occurance, feel it sometimes while idling. Just had check engine lite come on, showed was o2 sensors, r


Try cleaning the Mass airflow sensor and replacing the air filter. You can buy the spray MAF sensor cleaner from any auto parts store for about $6.00, ask the parts guy how to use it.

Jun 12, 2012 | 2004 Ford Escape

1 Answer

2002 Subaru Forester P0136 see P2270 P2271 intermittent idling fluctuation and acceleration hesitation


Is the wiring good going to the O2 sensors? Maybe just look the car over and see if you have any bad grounds. They can do weird things. Could be a bad ICU.

Jan 22, 2012 | 2002 Subaru Forester

2 Answers

Vehicle: 1998 Nissan Pathfinder SE V6 3.3L Problem: Vehicle has been hesitating during acceleration and occassionally stalling. After stopping and restarting, vehicle has been extremely hesitant. The...


Hello,
When the MAF on most vehicles reach a point of preventing the engine from starting, you can usually just unplug it and the engine will start. If that doesn't work-
You may want to try having the O2 sensor, ( Oxygen sensor ), checked. It works with other components of the emission system and can cause similar symptoms as the MAF, including preventing the engine from starting.

Donnie

Feb 21, 2011 | 1998 Nissan Pathfinder

1 Answer

O2 Sensor Problem?


yes an o2 sensor can cause those symptoms so can a minor vacuum leak --bad ignition wire -clogging fuel filter --sticking egr valve etc.

Mar 01, 2010 | 1999 Toyota 4Runner

1 Answer

Hesitates on acceleration


Does the car always hesitate during acceleration? If it ALWAYS struggles when it starts or ALWAYS hesitates on acceleration then I would say the issue is fuel delivery. If the problems are more intermittent and come-and-go then it could be an electrical issue.

I would start by changing the fuel filter. Changing plugs, wires, cap, and rotor are all good things to do as your budget will allow. I doubt you will have to change your injectors.

If you end up replacing any rubber fuel line, be sure to use the high-pressure stuff made for use on fuel injected cars.

I hope this helps! -Nick

Apr 10, 2009 | 1983 Chevrolet Chevy

1 Answer

Hesitation when accelerating, mostly between 20-30mph,


the funny thing is , we have had this problem also , the check engine lite came on , said downstream 02 sensor bad. replaced it. still had hesitation. change plugs and wires. still had hesitation, replaced fuel pump/fuel filter/fuel screen assembly, and the S.O.B. still has this problem. im running out of ideas except that i have run into other posts that say the crank position sensor , or the computer itself could be the culprit... all my switches and and other components seem to be working fine, though it makes me wonder also if tha cam sensor could also be going bad....

Apr 05, 2009 | 1998 Jeep Grand Cherokee

2 Answers

1989 Cavalier Z24 3.1 rough idle and hesitation


it sounds to me that the sensor your talking about is the camshaft positioning sensor. It regulates how much fuel you get to your engine, so that is also why you have the fuel smell as well.

Feb 23, 2009 | 1997 Chevrolet Cavalier

1 Answer

Motor hesitates and sputters when idleing and acceleration


Absolutely is the Problem! Please Rate My Response! Thanks!

Feb 01, 2009 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

71162 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6992 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...