Question about 2001 Chevrolet Silverado 1500

1 Answer

04 Chevy 2500HD 60 mo. orig. battery replaced now click-click??

Truck worked great until battery died of old age, replaced battery now truck won't start is there a way reset computer to accept new battery?

Posted by on

  • pbjsammich Feb 01, 2009

    Thanks for the speedy reply!! Checking fuses after I click ADD A COMMENT,...Will get back to you, Rich. --Jeff

  • Anonymous Mar 25, 2014

    truck goes click when starting. New Battery acts like ground problem

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 195 Answers

Hello;
I have seen stranger things happen, but to my knowledge there is no reset when you replace the battery. GM does put a lot of connections at the terminals and you need to ensure all the wires went back on. Also check the fuse/relay box under the hood to make sure a relay or fuse did not blow. Hope this helps.
Rate me high.
Thanks;
Rich
RPM Northwest

Posted on Feb 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

OBDII Codes 2006 Chevy 2500HD w/ 6.6L Duramax "Truck started losing power when warm, when cold for the first 10 miles or so the trunk runs great."


You need a dealer, there is a real problem going on here, way over the head of any home do it yourselfer. The main reason is the special tools required to interface with the control modules that are throwing these codes

Jun 29, 2017 | 2006 Chevrolet Silverado 2500HD 2WD

1 Answer

I have a 2003 Chevy Silverado 2500. Once again, it wouldn't start. The battery was completely dead, and it would not even start with a jump. Replaced the battery, started fine. But, now the voltage...


Battery was completely dead ? after how long , over night , or just out of the blue ? These year GM vehicle's 03 to 06 have instrument cluster problems , draining the battery . Do you know what parasitic draw is ? Google it . They used lead free solder constructing the electronics , an after a while it causes silver migration .
Chevrolet Truck Battery Dies Overnight Part
Chevrolet Truck Battery Dies Overnight Part II

Apr 19, 2017 | 2003 Chevrolet Silverado 2500HD

1 Answer

2003 Chevy 2500HD 8.1 Allison 4x4. Truck runs 100% fine. Each day when started MIL comes on codes P0700 and P1779 are present. I know what they stand for but have no idea how to fix. If codes are cleared...


I have the same exact truck as you do and had a similar problem awhile ago when i installed the hypertech system. I had to uninstall the hypertech and then have a buddy (cause i did not know how) drain the residual power from the brain... apparenlty the brain houses a small amount of power and remembers these codes so after you turn off your truck...poof there they are again. This worked for me, but then I had other electrical problems so I the dealership had to replace the brain.

Feb 08, 2010 | 2003 Chevrolet Silverado 2500HD

1 Answer

If i disconnect battery will it remove message?04 chevy silverado


only temporary. it will come back on again until the problem is fixed.

Jan 25, 2010 | 2004 Chevrolet Silverado 2500HD

1 Answer

05 Chevy 2500HD blowing cold air


i have seen this problem when the level
of fluid is low in the radiator start with truck cold remove cap and fill with proper mix of antifreze for your area replace cap start truck with controls set for max heat
and check operation verify overfill tank is filled to cold level when completed

Dec 06, 2009 | 2005 Chevrolet Silverado 2500HD 2WD

1 Answer

Vibration in the steering wheel on a 4wd truck


I just had the same issue with a 1999 2500HD and the vibration got worse above 50 mph. Problem was resolved with a new driveshaft. Old one (aluminum) was badly out of true and the problem didn't really occur until I had the U joints changed - then bent driveshaft vibration was noticeable. New driveshaft resolved issue.

Dec 03, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

2007 chevy silverado 2500 hd duramax shut down


mo me it sounds like low fuel volume i would check my lift pump

Sep 30, 2009 | 2007 Chevrolet Silverado 2500HD

1 Answer

Truck dies


Replace the Idle speed control valve.

Mar 13, 2009 | 1997 Ford F150 Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...