- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When you open the drivers door there is a fuse box on the dash where it meets the door. Pull off the cover and there will be a red reset button. Turn the car on but do not start it. Once the power is on tap the reset button until the chane oil light is flashing, the hold it down until it goes off. This is how you also reset the check tire pressure light.
Depress and hold RANGE and FUEL USED buttons until OIL LIFE INDEX appears on DIC display. Depress and hold RANGE and RESET buttons for 5-60 seconds. When OIL CHANGE SOON light flashes 4 times remaining oil life index is reset to 100 percent. If OIL CHANGE SOON comes on and stays on for 5 seconds, display did not reset, and you will have to try again.
It sounds like your oil pump is going bad..Well bd now since you said the light stayed on...And the noise you hear is the sound of a engine not getting enough oil, to lube all those metal parts,,,,You can replace your oil pump, and hopefully you didnt do too much damage to the motor....Goodluck...
it sounds like a faulty sending unit the only way to know for sure is to install a mechanical gauge and measure pressure. or just replace the sender. it is not wise to drive it and just assume it is nothing major. if it is a mechanical problem will cost a lot more if you lock the engine up