- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure master cylinder is full of brake fluid, then check to make sure rear drum brakes are adjusted properly. With rear wheels off the ground, truck in neuatral, wheels chocked, by hand spin wheel it should have a firm drag to it. If not they need to be adjusted.
on the wheel that is hot, jack it up and see it the wheel spins free or drags? if it drags, then loosen bleeder on the caliper, it if now spins free, you want to replace that caliper hose, if it is still dragging, then the caliper piston is stuck and you will need to replace it.
check brake lines they may have gotten pinched very commonok new c/k trucks when you crank the torsion bars up to far you may have hit something and pinched the brake line check those before messing with the master cylinder those are a real pain