Will turn over but there's nothing, speedometer broken at 140mph, clock keeps resetting, no horn, won't start with a jump, no power locks or windows with key in on position, keyless entry won't work, please help?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need. goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The security, antitheft or lock picture/icon is a visual indication that something in the car's antitheft system is failing. In most GM cars and trucks there is a hidden system that most people are unaware even exists. From the moment you put your key in the ignition, there begins a constant line of communication between your key's security chip or transponder, to the ignition's lock cylinder, and then to the car's TDM (Theft Deterrent Module). These 3 parts are in CONSTANT communication. If the key is in the ignition, then these parts are sending signals to each other. The security light illuminates when that signal gets broken, even just for a second. When the signal breaks, the car misinterprets this as an attempt at theft and goes into antitheft mode. The car thinks its being stolen or hotwired because it is not getting that signal from YOUR specific key. This is why the security light turns on and shuts down your vehicle. This link explains it pretty well.
If the security light keeps flashing,you might as well do a reset.
Be sure to turn off all the accesories including the radio before you start the process.
Insert the key to the ignition switch and turn the key to ON position without starting the car.
leave it ON until the flashing light (security) stops.It will take approximately 15 to 20 minutes.
As soon the flashing stop,turn the key to OFF
position and start the cart.
Hope this help.
Hi, this problem is present in many Intrigue's and Alero's, happens when you turn on the ignition and the motor starts turning, if the car doesn't start right up, the neddles to the temp and gas gage and the speedometer go crazy, most of the time when you turn the key off, they go back to the normal positions, but some time they get stuck.
It has happend to my 98 Intrigue 4 or 5 times, and what I do is take the Instrument panel off and manualy reset the needles.
It may sound complicated but it is not, it takes me about 15 min. to reset mine.
I can explain to you step by step how to remove the Instrument Panel, but you'll be better off getting the Haynes Repair Manual for your Alero, you'll find clear and simple instruccions and pictures to help thru. Besides, I can almost guarantee that it will happen again.
you have to replace air bag . because your horn pad contact switches made in bag . when bag deployed it mess your contact switches .its going to cost you 700.00 dollars. have to fix it . or your car wont pass state inspection.sorry it happen . good luck.
does the car crank or not?? if it cranks and doesnt start it could be a couple things. could be fuel pump is bad or could be an ignition problem and ur not gettin spark in ur sparkplugs. if nothing happens when u turn ur key its more than likely that ur starter is bad. if this doesnt help im sorry but this is the only thing i can think of.
I replaced the radio with an aftermarket one and now my dash lights, power windows and my headllights have dont come on automataclly like they did before. my alarm on my remote dont work either, I think i did something to the alarm system, that is why they are not working.