Question about 1999 Jeep Wrangler
I have a problem with a 1999 4.0 litre petrol jeep. one day while out it would not start. the battery was checked and replaced but the engine would crank but not run. After someone checking battery and alternator and leaving for several days the vehicle started with a charged battery. the engine will start ok when cold but not when warm. also the key symbol light flashes and the dash bleps 5 times. have tryed to get fault codes up on dash by turning ignition on off three/four times within 5 seconds but no codes flash or come in milage display.
To the answer you cant pull codes because you have the later obd system. ive got a 11/01 wrangler and i can pull codes on my odometer turning on/off the key 3 times in a row.
Posted on Nov 04, 2013
We replaced fuel pump in gas tank and it did the job, not too bad of a job. make sure you also change out the filter on the pickup tube, it's the only filter in the fuel system on ours.
Posted on Feb 03, 2009
The reason you can't pull codes is that you have the "later" OBD system which can only be accessed with a scan tool.
Posted on Feb 01, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 13, 2013 | 1999 Jeep Wrangler
Oct 31, 2009 | 1999 Jeep Wrangler
Sep 09, 2009 | 2008 Jeep Wrangler
Jan 09, 2009 | 1999 Jeep Wrangler
Oct 03, 2008 | 2005 Jeep Wrangler
247 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: