Stock CD player in Honda Accord 98 how to use code?
Ok here i bought Honda Accord 98 but when i try to enter code nothing happens no beeps no unlocks nothing on the screen it shows '' Code e'' and thats it there is antitheft light blinks red maybe this will be helpful please if you have any ideas of how to use code with this cd player let me know Thanks!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Look in the glove box. On the back of the glove box door there should be a small white sticker with two sets of numbers. The number set with five (5) digits is your radio reset code. Use the radio preset buttons to enter the code. If entered correctly, the radio should turn on instantly to the factory default settings.
the start points for entering the radio code are either when the radio says code or displays an error 1, 2 or such. once you enter the code it should beep once and turn on. It sounds like you are following the procedure though. Is it possible the audio unit was damaged?
I have a crv also. the audio system has an anti-theft mechanism, to deter thieves from stealing your cd player/radio. you need a code to turn your unit back on, usually a four or five digit code, that should have been provided when you bought the vehicle. If you don't have it, the unit will come back on after, and only after a full, uninterupted hour of driving.
I've had this happen twice when the battery died. It goes into the SAFE 2 mode if you try entering it and don't do it right and then you have to leave the radio on for 1 1/2 hours to have it come on to 1000 and then set it with each number one at a time and then hold down right reset until he beeps on. So, if you are discouraged as I was, the answer is to leave it on with the SAFE showing for over an hour and it probably will come on with the 1000 for setting eventually.
"PEO" USUALLY means Player Error Optical,which means in most cases the laser has malfunctioned.When this happens of course,no CD or disc will play. You can try and clean it with a disk cleaner and if that doesn't work you are probably gonna hafta buy a new cd player. I have a link to a best buy private auction that lets you bid on things like cd players and what not. I bought one, a Pioneer DEH 2900 for 16 bucks!, Lemme know and I'll have it sent to you.