An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: my mirror an driver side it broken
You will need to go to the Dealership for a New Mirror Anyway, Why not Get it Installed there Unless you can Find a Local Body Shop that will do it Cheaper. Make Some Calls. Please Rate My Response! Thanks!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You must remove the panel behind the mirror on the inside of the door.It may be a small pop off panel or you may have to remove the entire door panel.Once removed you will see three nuts on the back of the mirror,remove them and unplug the wire.Then reverse the procedure.
You shouldn't have to remove the panel, just the black plastic cover right behind the mirror, it holds about 3 or 4 bolts, pull them out and hang on to that mirror, it is heavy, It has cables or wires attached to it. If it is just the glass that is broken, you can pop the glass right out and put in a new piece and don't take anything off. You can even get a new mirror at the grocery store parking lot. Check it out, Hope this helps.
normally, if the mirror glass is broken you can remove this clip from the back or it is still in place and only the glass is out. If the mirror glasses are jumped out the system and you lost it completed, there is a chance to get replacement from the authorized dealership (replacement mirror glasses with attached clips). After marked parts are a great way to save money, but it works not all the time.
Go to a breakers yard or ford, you will have to unscrew & pull off the interior cap on the insde to udo the mirror whole unit & pop the glass out of the old unit by pulling carefully, then disconnect the motor & wiring, then re-fit as dismantled.
Hope this helps, If you can't do it yourself then buy the mirror & take it to a decent garage as they are not hard to replace & the dealership will charge twice as much !
Hope this helps !
On the inside trim, you can remove screws that are by the door handle,
arm rest, under door and side of door and then gently pull back on the
panel as there will also be retaining clips attached and you don't want
to break them. You'll need to lift the door panel upwards in order to
get it off the window ledge. Then you'll need to manipulate the panel
and disconnect the door handle linkage from the door handle and
disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door