The engine sounds like it is shaking
SOURCE: 1996 Jeep Laredo shakes between 55 and 65mph
worn or loose wheel bearings-tires out of balance-worn tie rods-worn ball joints -rotor has high and low spots.
SOURCE: 1993 jeep grand cherokee laredo 4.0 no spark
First I would change the plugs, wires, distributor, and rotor button next I would make sure the firing order is correct then have timing checked if all check out have the cylinders tested.I hope this get your Jeep up and running. Please Rate Me . And you can always ask me
SOURCE: wheels shake terribly on 95 jeep laredo when I hit a bump over 50
You need ball joints maybe. you may have a loose axle nut maybe. you may have a loose tire maybe, your alignment may be way off.
SOURCE: My 97 jeep grand cherokee makes a chirping sound under front
The noise and the light may or may not be related. The noise may be the wear indicator on the brake pads touching the rotor (they are supposed to do that when brakes are worn) The abs light triggers off a wheel on the axle end. If you have a bad joint on the axle, it could be noisy and causing the wheel to not have the proper clearance to the abs sensor. You really need to take the wheel and brake assembly off and carefully inspect everything. Make sure all abs sensor wires are undamaged...it doesn't have to be at the same wheel that's chirping.
Testimonial: "Thanks so much, this makes sense I will have it checked out right away. I really appreciate your help."
69 views
Usually answered in minutes!
×