Question about 1993 Pontiac Bonneville

1 Answer

93 Bonneville,security light flashing,will not engage starter tried disc.battery,tried key in door,turned ignition on 4 ten mins or so, but will not reset.When I tried jumping starter terminals motor will crank but not start.Would greatly appreciate any answers

Posted by on

  • Anonymous Mar 16, 2014

    Battery easily turning over 3800 Engine but is now taking longer & longer to "catch/start". I tried turning it to on to "pump it up" before engaging starter but that didn't help the issue.

  • Anonymous Mar 22, 2014

    I disconnect positive anode but lights continue to flash. When switch is turned on it clicks as if the battery is dead. Can I reset it or remove it all together? I bought it used fron an individual owner and did not get the magnetic code key ring of key.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have been having problems with my 2001 pontiac grand am se 2.4 it has been jerking n skipping i put it on a comp at advanced auto parts i got this reading map\boro\circut high output and torque converter circut stuck on i need to know what the problems r and how to fix them i think the first one is a map sensor but i dont know about the torque converter circut can someobne help me i am gonna try n save some money and fix it myself if i can find out what these r and how to go about fixingt them

Posted on Feb 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Anti theft light stays on solid after replacing key and tumblr and ignition switch did the three ten min thing two or three times still no power to starter


You must use the correct part or the security system will lock you out and you will not have a starter engagement. The key and cylinder are coded to the security module. At this point you will need the dealer to reprogram the system.

Sep 26, 2016 | Cars & Trucks

1 Answer

Security system lock out 2006 DTS


Not to insult your intelligence but is the shifter all the way in park? You may have an issue with linkage too. Or ignition switch needs replacement, (maxima's are also known for ignition replacement)
Other wise disconnect your car battery for ten min, just leave it sit, after ten min put ur battery cable back on, try ur key again.if you have a spare key work with the drivers door a little with locking and unlocking

Dec 14, 2013 | 2006 Cadillac DTS

1 Answer

My 1998 buick century 3.1 will not start. I changed starter , I changed the ignition switch , I even jumped the battery to starter with a push button , It now will turn or crank , but ,, it still will not...


THERE IS A CHIP IN THE KEY I BELIEVE. THERE IS A RELEARN PROCEDURE YOU CAN TRY IF WHEN YOU TRY AND START IT THE SECURITY LIGHT FLASHES. HOOK UP A BATTERY CHARGER. TURN THE KEY ON AND TRY AND START THE CAR AND RELEASE . DO NOT TURN KEY OFF LEAVE IT IN THE RUN POSITION. AFTER 10 MINS THE LIGHT WILL STOP FLASHING. TURN KEY OFF. TRY AND RESTART CAR AND AGAIN DO NOT TURN KEY OFF LEAVE IN THE RUN POSITION. LET SET 10 MINS AGAIN. LIGHT WILL STOP FLASHING AFTER THAT 10 MINS. DO IT AGAIN FOR THE 3RD TIME. SHUT KEY OFF LET SET 5 SECONDS AND START THE VEHICLE. HOPE THIS HELPS

Feb 22, 2013 | 1997 Buick Century

1 Answer

Have a 93 cadillac fleetwood, changed key cilinder and computer, but pass key fault light still comes out and does not let engine turn on.


The security system is keeping the engine from starting. In order to manually learn the security, you should try the following. With a fully charged battery, and all accesories, including headlamps, and dome lamp off, turn the key on, crank the engine for a second, then release the key. Leaving the ignition on for ten miniutes, the security light will shut off. turn the key off, back on, then repeat. This needs to be done 3 times, after 30 mins, try starting the engine. It should have relearned, and start up. Good luck...coop

Dec 10, 2010 | 1993 Cadillac Fleetwood

3 Answers

2000 pontiac bonneville wont start


It sounds like a bad connection somewhere, check the battery cable connections for corrosion and tightness, both ends. It could be the starter, starter solenoid, starter relay, neutral safety switch or ignition. Try moving the shift lever to the "N" position and see if that helps. When you say you have a dead key, do you mean you have no dash lights, (oil pressure light, battery light, things of that nature) no clicking, no nothing?

Jan 02, 2010 | 2000 Pontiac Bonneville

2 Answers

My 1999 Pontiac Bonneville will not start. When


The security system has been activated call the dealer to getthe deatils on how to reset it, normally you pull the security fuse for 30 seconds to restet it. if that does not work call the dealer and they can help you.

Nov 01, 2009 | 1999 Pontiac Bonneville

2 Answers

2004 Ford Explorer won't start after battery recharge


A FORD MACHANIC HAS TOLD ME THAT IN FACT THE KEY HAS TO BE RECODED. MY SITUATION IS EXACTLY THE SAME. HE SAID TO RECODE THE KEY I HAD TO TURN THE IGNITION TO THE RUN POSITION, THE SECURITY LIGHT ON THE DASH WILL FLASH RAPIDLY AND CONTINUE TO FLASH FOR 15 MINUTES . WITHIN FIVE MINUTES AFTER THE LIGHT STOPS FLASHING I MUST TURN OFF THE IGNITION FOR ONE SECOND AND TURN IMMEDIATLY BACK TO THE RUN POSITION FOR 15 MORE MINUTES. THE LIGHT WILL GO OFF AGAIN . WITHIN 5 MIN. I MUST TURN OFF THE IGNITION FOR ONE SECOND AND TURN BACK TU RUNNING POSITION. 15 MINUTES LATER REPEAT STEPS AGAIN AND THE KEY WILL BE REPROGRAMMED, AND STSRT THE CAR. GOOD LUCK MY CONTACT IS A FORD MASTER MECHANIC.

Jul 17, 2009 | 2004 Ford Explorer

4 Answers

93 bonneville security light flashing


your key reader is not reading the chip in your key you can either replace the ignition switch cost about 250 dollars parts and labor or i can tell you how to bypass it for less than 20 bucks in premium chat hope this helps
thanks wes

Feb 01, 2009 | 1993 Pontiac Bonneville

1 Answer

Flashing security light in dash


pontiacs have a security key do you have another key you can try to make sure this is not the problem ?

Jan 25, 2009 | 1995 Pontiac Bonneville

1 Answer

Security light flashing, does not turn over, do i replace ignition or ecm or both? Do i need new key if i replace ignition?


Chances are the wire going to ignition broke allowing the security to start flashing.this will keep the
car from cranking.On my 93 bonneville I went to Radioshack and got a 680 ohm resister,cut the 2 small
yellow wires on lower steering column under dash,soldered resister to the 2 yellow wires coming from harness.Cost of repair..$1. you can read the resistance on the key by using ohm meter on each
side of chip in key

Jul 30, 2008 | 1997 Pontiac Bonneville

Not finding what you are looking for?
1993 Pontiac Bonneville Logo

469 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...