Question about Peugeot Liberte

2 Answers

How do i fit new speaker wires to my car sterio? its a peugeot 106 (1998)... i cant seem to get the wires in "behind Dash Board" any idea?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,596 Answers

Fish them in With a "LEAD" HARD Wire like a Clothes Hanger Tie & Tape the New WIRE to a Shorter siece of Hanger wire takes Time And Nerves Of STEAL take YOUR TIME you can get it. PLEASE Don't Forget to RATE ME good Luck
Friend, Rejakwilson

Posted on Jan 31, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

You will need to Route the New Wires where the Old ones Are. Inside the Trim Panels and Kick Plates. Unhook the Speaker Wires From the Speakers, Loop the Old and New Wires togetherand Tape together with Black electrical Tape. Remove the Trim that you can get to and Pull the old wire. It will Bring the New Wires with it. This is the Easiest way. Please Rate My Response! Thanks!

Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

L/h/r indicator not working on 59 plate Peugeot partner van.


The rapid blink indicates the system has lowered resistance because a bulb circuit is open.

Jun 21, 2016 | Peugeot Cars & Trucks

1 Answer

Immobilised


it could be the catalytic converter sensor or you have a bad wire to it and the vibration is setting off.

Oct 05, 2013 | Peugeot Cars & Trucks

1 Answer

Fuse keeps blowing to my dash guages in my 95 gmc sierra why?


have you recently installed a new radio ? I have knowen people to install radiosincorectly the dim wire behind the radio shows as a earth. however when you turn headlights on this becomes a positive. if you have wired this wire to your sterio this is whyyour dash lights & internal cab light etc keep blowing.. if your wondering why sterio still works is because its earthed through the aerial or mounting bolts.

Jan 05, 2013 | 1995 Chevrolet Silverado 2500

1 Answer

My heater in my peugeot 307 stopped working any ideas?


thier is a resister situated on a card that plugs into the heater / blower assembly under the dash board these are prone to burning out, at best replace the card but beware the connecting plug sometimes burns out then you have to replace the wiring loom

hope this helps
nev

May 17, 2010 | Cars & Trucks

1 Answer

Dash above steering wheel is out.


Did you happen to hook you stereo ground to the wire that lit the lights on you factory stereo from the dash light controls? I think its a brown wire

Mar 30, 2010 | 1995 Chevrolet Caprice Classic

2 Answers

I cant find the lever to open my bonnet .its not under the steering column where the manual says it is. we recently had dual controls fitted, is there another way to open the bonnet? Its a peugeot 1007.


Hi sometimes they are right up behind the dash, get on your knees and look up behind it. the only other way is to get under the front of the car with a pair of pliers and try to pull the bonnet release cable.

As the car had Duel controls they may have moved it to the passenger side.

Jan 31, 2010 | 2006 Peugeot 405

2 Answers

Peugeot Expert van Alarm


i have a new van but need to remove dent in bumper

Jun 12, 2009 | 2006 Peugeot 604

1 Answer

Trunk access from behind the seats


on both side behind the rear speakers, if u unbolt the speakers there is enough space that you can fit your arm through and make it poke out in the trunk....and in the trunk you just remove the carpet to get through, you can out that back when your done

Aug 13, 2008 | 1995 Honda Civic del sol

2 Answers

Peugeot sterio code


You need to ring the Peugeot Dealers, as I had that problem with my Nissan radio on my Nissan. The dealers were able to immediately provide me with the right code to input and radio has worked no problem since. When I disconnect battery I always need to re-input the same code.
If your Blaupunkt wasn't Manufacturer fitted, then whoever of your previous owners who fitted the stereo would have the code, or have you tried Blaupunkt themselves, don't know if they keep codes?

Jul 07, 2008 | 2005 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Wahs Team

Level 2 Expert

205 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...