The car cranks over but will not start up? what could it be
Well you need spark at the right time, fuel, and normal compression to make the engine run.
So you would need to check for spark and fuel, then compression if necessary.
SOURCE: how do i change the spark plugs in a 2000 mazda
Hi,
Just remove first the spark plug cables on top of your engine, then use a 23mm socket wrench, turn the socket wrench counter clockwise until the spark plugs are loosen.
Hope that helps you!
SOURCE: 1999 mazda prodege 1.6 wont start
no spark. maybe a broken timing belt, bad coil,crank sensor,ecm,ignition module,etc.
SOURCE: 98 Mazda 626 Won't Crank, Won't Jumpstart, no power on anything
Either one of your cables isn't getting a good enought contact on the battery or solenoid, or the solenoid is bad, or relay for starter is bad.
263 views
Usually answered in minutes!
×