Question about 1997 Buick Park Avenue

1 Answer

1997 buick park avenue

I rung the bolt off in my tension pulley i want to use an easy out to get the bolt out i didn think about it being right hand threads how can i remove the whole assembly or get this job done

Posted by on

  • 1 more comment 
  • prospectsfin Jan 31, 2009

    belts off need to remove the whole assembly

  • prospectsfin Jan 31, 2009

    k i removed the alternator and the near bracket now the rest of the bolts seem to be in my motor stil cant get the whole assembly off

  • prospectsfin Jan 31, 2009

    this is what i want to take off the bolts sits inside i broke the bolt in the middile pulley

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Is there still Tension on the Belt? If so, You will need to find Something that will Push the Pulley in the Lower Position so that you can remove the Belt. Not going to be Easy and you will need a Helper for this Job. Please Rate My Response! Thanks!

Posted on Jan 31, 2009

  • 1 more comment 
  • Travis Humphries
    Travis Humphries Jan 31, 2009

    There should just be a Couple of Bolts on the Bracket to get this Removed. I suggest to Everyone that Works on their Own Vehicles to Invest in a Haynes or Chilton Repair Book for your Car. They help a Lot. Some Libraries Carry these if you do not want to Buy them. Please Rate My Response! Thanks!

  • Travis Humphries
    Travis Humphries Jan 31, 2009

    Can you send me a Picture of the Assembly???? Let me know and I will tell you where to send it.

  • Travis Humphries
    Travis Humphries Jan 31, 2009

    Send that Pic to MrScary6661313@aol.com I cannot see it on here.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is the thread on the 95 Park Ave tensioner a reverse thread ?


i`m guessing you mean the serpentine belt tensioner.the thread for the bolt that holds it to the motor is right hand thread not left hand(reverse) counter-clockwise to remove clockwise to tighten.

Jun 10, 2011 | 1995 Buick Park Avenue

2 Answers

Is there an adjustable pulley on the 1996 Buick Park Avenue that lets you replace the belt?


Hello... Yes there is an adjustable pulley.... It is called a belt tensioner. You can find it, with the engine off, pull up on each pulley. The one that moves the most is the tensioner...

To release the tension on the belt, a special tool or a 3/8 or 3/4 in rachet is used...

Once the tension is released, the belt is easily removed and installed.

Good Luck....

Jun 10, 2010 | 1996 Buick Park Avenue

2 Answers

1998 Buick Park Avenue, replaced serp belt, but now no tension.


Hello. The tension can be adjusted. Just loosen the tensioning pulley, use a crow bar to put tension on the serpentine belt and tighten that tensioning pulley back down. Joe

Apr 15, 2010 | 1998 Buick Park Avenue

1 Answer

Assemble a 1993 park avenue serpentine belt


If the stickers haven't been removed,there is a routing diagram right on top of the radiator cowling or on the right front inner fender. One of your pulleys is a spring loaded tensioner that you move with a breaker bar or rachet or a box-end wrench,depending on the style of tensioner.

Mar 01, 2010 | 1993 Buick Park Avenue

1 Answer

How do I change the main serpentine belt on a supercharged 99 park avenue ultra?


On your idler pulley there is a 15mil bolt... put a wrench on this bolt (long wrench) and turn it like you are turning it tighter. The idler pulley will move forward releasing tension on your belt. Make sure you pull the belt off the alternator pulley when the idler pulley is compressed. You may want to pay attention to how the belt is on there, maybe 2 people would be a good idea too if you aren't familiar with your car.

Feb 22, 2010 | 1999 Buick Park Avenue

1 Answer

1991 buick parkavenue pulley clanking


Because the bolt should not be sticking out of it.. Have it tightened before it comes off and causes damage to crankshaft or soeones windshield. Soon. Good Luck, Ned

Sep 24, 2009 | 1991 Buick Park Avenue

2 Answers

Replace 2000 buick park ave serpentine belt


Firt - study & write down (draw) the belt path,,
and be sure about it..

Then - put a wrench on the nut in the center of the tension pully.. Move the tension pully to loosen the belt.. Pull belt off..

Repeat to put new one on..

Should be pretty easy..

Jul 09, 2009 | 2000 Buick Park Avenue

1 Answer

95 buick park ave power steering pump bolts


I think any dealer would have these on hand; if my memory is working right, these did have to be a specific class and will need to be torqued carefully to avoid stripping the female threads.  

Feb 16, 2009 | 1995 Buick Park Avenue

4 Answers

Motor mounts and pulley tensioner


that car to my knowlege & replacemt has one engine mount by the belt & 2 tranny mounts one in the front & that canbe purchased at amazon for about $130 alot cheaper then dealer! also rear tranny can be purchase as insert or complete with bracket & mount together! have no clue on tensioner as mine has not went yet!!

Jan 22, 2009 | 1997 Buick Park Avenue

1 Answer

Water pump how to change it


Remove the drive belt, remove the water pump pulley and remove bolts from (6 of them I think) pump, this is an easy one, did my wife's buick in 1 hour.

Oct 21, 2008 | 1991 Buick Park Avenue

Not finding what you are looking for?
1997 Buick Park Avenue Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...