Question about 1994 GMC Sonoma

1 Answer

Tail LIght Removal

In order to fix another problem I need to remove my passenger side tail light but I am unsure how to remove it.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 188 Answers

Open the tail gate, and you will see usually 2-screws to remove.remove the screws, and the lens will flip out.

Posted on Jan 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO REMOVE PASSENGER SIDE REAR TAIL LIGHT


From inside the trunk remove the cover on either side & you will have access to the holdown bolts for the taillights (behind the lens)

Sep 10, 2014 | 2008 Buick Lucerne CXL

2 Answers

2006 Jeep Commander Tail light


The tail light circuit is separate from the brake and turn signal circuit. Either the bulb socket has gone bad or a wire has flaked out. Check for voltage at the socket on either pin base when you have your parking lights on. If voltage is present, it is either a worn socket failing to hold the bulb properly, or another bad bulb. If no voltage, determine which wire on the other side is tail light power, and run a new wire across to the side that isn't working and connect it to provide power.

Apr 09, 2014 | 2006 Jeep Commander

1 Answer

How to remove and replace tail light assembly on 2003 jeep grand cherokee. There's one screw behind the rear quarter panel to complete the removal process of the tail light assembly. How do I remove that...


There is 2 screws located on the side when you open your tail gate by the tail light. remove these 2 screws and pull the tail light out and disconnect the wire connector. Hope this helps.

Best of luck

Jun 13, 2010 | 2003 Jeep Grand Cherokee

1 Answer

When I press the break only my passanger side tail light works. Is this a fuse problem?


Try replacing the passenger side tail light bulb.
Inside trunk, remove two black plastic nuts holding carpet liner in place on side where bulb is burnt out.
Pull back carpet, use a flat screwdriver to pop out the wiring. Remove three nuts using a small open-ended socket or pliers.
Pop out entire tail light assembly. Locate bulb to be replaced. Rotate 1/4 turn to remove from socket. Replace bulb and repeat in reverse order to reinstall.
Thank you for using fixya and good luck

Apr 29, 2010 | 2004 Dodge Stratus

1 Answer

Drivers side rear blinker light needs replaced


Open the tail gate, and you will see on the side of the tail light housing two screws that you will need to unscrew in order to take the housing out. If it is the tail light ,that is on the actual gate, open the tail gate and remove the plastic bed liner there are few of screws that need to be removed. Hope this helps you fix it.

Apr 17, 2010 | 2003 Subaru Baja

2 Answers

Tail Light Removal on 03 Charade


Daihatsu Charade EL 2003 rear lens removal. Open the tailgate and remove the two bolts securing the lens assembly. Then get a good hold of the lens and pull out. You need to pull out the whole lens assembly since there are three plastic protruding 'clips' on the side along the lens. Please view attached pictures. Then turn the bayonet bulb holder, replace the slide on type bulb and reassemble everything back in place.
4_18_2015_5_22_46_pm.jpg4_18_2015_5_22_47_pm.jpg

Apr 17, 2010 | Daihatsu Charade Cars & Trucks

1 Answer

Need to know on a 1980 firebird formula tail light


Four of these light will be the parking and brake lights. The other 2 are your reverse lights.

The order is REVERSE lights are the sockets CLOSEST to middle. (gas Door)

Aug 26, 2009 | 1979 Pontiac Firebird

1 Answer

How do you change tail lights for the 2003 passat


Rear Turn Signal, Brake and Parking Lights Removal & Installation To Remove
  1. Remove or disconnect the following:
    • Harness connector
    • Combination nuts
    • Lamp and its assembly toward rear
To Install:
  1. Install or connect the following:
    • Lamp and its assembly into position
    • Combination nuts; torque to 35 lb-in. (4 Nm)
    • Harness connector
This is the only thing the tech manual says.

Jul 22, 2009 | 2003 Volkswagen Passat

2 Answers

Access to tail light wiring harness plug


You have to remove the access panel on the interior side of the passenger compartment to access that connector.. it's a simple procedure after you see the wire harness and bulkhead boot.

May 09, 2009 | 2002 Hyundai Santa Fe

1 Answer

Can't get passenger side tail light out of car.


you will need to remove the rear bumper to remove the light assembly. would you like removal instructions?

Apr 05, 2009 | 2004 Acura TL

Not finding what you are looking for?
1994 GMC Sonoma Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

71338 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...